Warning And Technical Specification - Roadstar HIF-9907 Service Manual

WARNING:
FOR CONTINUED SAFETY THE FOLLOWING PRECAUTIONS SHOULD BE FOLLOWED
DURING SERVICING.
1.MAKE SURE POWER CORD IS DISCONNECTED BEFORE REPLACING ANY PART.
2.REPLACE WITH TYPE, CRITICAL PARTS WITH! MAKE ON THIS DIAGRAM.
3.THE FOLLOWING TEST MUST BE IMPLEMENTED AFTER EACH REPAIR BEFORE
RETURNING IT TO CUSTOMER.USE AN OHM-METER TO MEASURE THE F.C.
RESISTANCE FROM BOTH A.C.CONDUCTORS TO ANY EXPOSED METALLIC PART
SUCH AS A SCREW HEAD.METAL INLAYS ETC. THE RESISTANCE MEASURED SHOULD
BE 10 MEGAOHMS MINIMUM.
TECHNICAL SPECIFICATION
Power output
Frequency response
Bass Boost
TUNER SECTION
FM Section
AM Section
CASSETTE SECTION
Tape
Tape
Tracks
Frequency Response
CD PLAYER SECTION
Frequency Response
S/N Ratio
Channel Separation
TITLE: WARNING AND TECHNICAL
SPECIFICATION
MODEL:HIF-9907
:2 Watts RMS per channel
into 8 ohms
:40Hz-15KHz
:100Hz+10dB
:88MHz-108MHz
:540KHz-1600KHZ
:Cassette type
:4.75cm per second
:2Tracks stereo
:125Hz-8KHz
:40Hz-10KHz
:60dB
:40dB
NOTE:
In keeping with our policy of continually
improving our service and the technical
quality of our products we reserve the right
to change component type.manufactures
sources of supply of technical specification
are any time.
3