Warning And Technical Specification - Roadstar HIF-9997 TR Service Manual

Model No.: HIF-9997TR
Base Model: Nil
WARNING:
FOR CONTINUED SAFETY THE FOLLOWING PRECAUTIONS SHOULD BE FOLLOWED
DURING SERVICING.
1.MAKE SURE POWER CORD IS DISCONNECTED BEFORE REPLACING ANY PARTS.
2.REPLACE THE PRODUCT'S TYPE AND CRITICAL PARTS AS SHOWN IN THIS DIAGRAM.
3.THE FOLLOWING TEST MUST BE IMPLEMENTED AFTER EACH REPAIR BEFORE
RETURNING IT TO CUSTOMER. USE AN OHM-METER TO MEASURE THE F.C.
RESISTANCE FROM BOTH A.C. CONDUCTORS TO ANY EXPOSED METALLIC PART
SUCH AS A SCREW HEAD. METAL INLAYS ETC. THE RESISTANCE SHOULD
BE MEASURED 10 MEGAOHMS MINIMUM.
TECHNICAL SPECIFICATION
Power output
Frequency response
Preset EQ
TUNER SECTION
FM Section
MW Section
CASSETTE SECTION
Tape
Tape Speed
Tracks
Frequency Response
CD PLAYER SECTION
Frequency Response
S/N Ratio
Channel Separation
TITLE: WARNING AND TECHNICAL
SPECIFICATION
MODEL:HIF-9997TR (2Band 4.5W)
:4.5 Watts RMS per channel
into 4 ohms
:40Hz-16KHz
:Flat
:Rock
:Classic
:Pop
:87.5MHz-108MHz
:522KHz-1620KHZ
:Cassette type
:4.76cm per second
:2Tracks stereo
:125Hz-8KHz
:40Hz-16KHz
:60dB
:36dB
- 3 -
Revision No.: 0
Revision Date: 2006-02-10
NOTE:
In keeping with our policy of continually
improving our service and technical
quality of our products we reserve the right
to change component type, quality and
technical specification at any time.