Ricoh Pro 8100s User Manual page 36

3. Other Information for This Machine
Sleep mode
• If this machine remains idle for a specified period or when the [Energy Saver] key is pressed, it
enters Sleep mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep mode is 60 minutes. This
default time can be changed.
• The machine can print jobs from computers while in Sleep mode.
Specification
Reduced electrical
consumption in Low
Power mode
Time of switch into Low
Power mode
Time of switch out from
Low Power mode
Reduced electrical
consumption in Sleep
*1
mode
Time of switch into
Sleep mode
Time of switch out from
Sleep mode
*1 The time it takes to switch out from energy saving functions and electrical consumption may differ
depending on the conditions and environment of the machine.
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see "Timer Settings", Connecting the
Machine/ System Settings
• The machine enters sleep mode directly in the following situations:
• Low Power Mode Timer and Sleep Mode Timer are set to the same time
• Sleep Mode Timer is set to a shorter time than Low Power Mode Timer
• Depending on which embedded software application is installed on it, the machine might take
longer than indicated to enter Sleep mode.
34
Type 1
260 W
*1
15 minutes
35 seconds
*1
1.2 W
60 minutes
360
*1
seconds
.
Type 2 Type 3
260 W 170 W
15 minutes 15 minutes
35 seconds 75 seconds
1.2 W 1.3 W
60 minutes 60 minutes
360 360
seconds seconds
Type 4 Type 5
230 W 155 W
15 minutes 15 minutes
35 seconds 75 seconds
1.2 W 1.2 W
60 minutes 60 minutes
360 360
seconds seconds