Fine-Tune The Camera Focus - Vivotek IP7253 Quick Installation Manual

7

Fine-tune the Camera Focus

1. Detach the CS-mount lens from the camera body.
2. Turn the camera body bottom up.
3. Use the supplied L-type hex key wrench to loosen the lens mounting screw; the
CS-mount ring becomes rotatable.
4. Use a coin to turn the CS-mount ring; fi ne-tune the distance between the sensor
and the lens.
5. When fi nished, tighten the lens mounting screw to fi x the CS-mount ring.
6. Attach the CS-mount lens back to the camera body.
1
Lens Mounting Screw
2
EN - 9
CS-mount Ring
3
4