Fine-Tune The Cs-Mount - Vivotek IP8172 Quick Installation Manual

7

Fine-tune the CS-Mount

The following applies only when you have troubles getting sharp images with particular
lens:
1. Detach the CS-mount lens from the camera body.
2. Use the supplied L-type hex key wrench to loosen the lens retention screw. When
done, the CS-mount adapter ring becomes rotatable.
3. Use a removal tool to turn the CS-mount adapter ring; fine-tune the focal length
between the sensor and the lens.
4. When finished, tighten the lens retention screw to secure the CS-mount adapter ring.
5. Attach the CS-mount lens back to the camera body.
1
Lens retention screw
CS-mount adapter ring
2
EN - 8
3