Instrument Cluster (Type B) - Mazda 3 Smart Start Manual

Instrument Cluster (Type B)

OUTSIDE
TEMPERATURE DISPLAY
The outside temperature unit can
be switched between °C and °F
using the following procedure
Without Mazda Connect:
1 Push the INFO button with
the ignition OFF and continue
pressing the INFO button for 5
seconds or longer after switching
the ignition ON. The outside
temperature display flashes.
2 Push the up or down part of
the INFO switch to change the
temperature unit.
3 Push and hold the INFO button
for 3 seconds or longer until it
stops flashing.
With Mazda Connect:
1 Go to System Settings.
Traction Control System (TCS)/
Dynamic Stability Control (DSC)
On: TCS/DSC malfunction
Flashing: TCS/DSC operating
BSM
BSM OFF (Blind Spot
OFF
Monitoring)
Dynamic Stability Control
(DSC) Off Indicator Light
OFF
SPORT Mode On
Lights On (Exterior)
High Beam Control On
Headlight High Beams On
Air Bag/Front Seat Belt
Pretensioner System
Malfunction
Check Engine Light
TPMS NOTE:
change and turn the TPMS warning light on. If the warning light comes on, see p. 7.
33
(p. 21)
(p. 39)
Low ambient temperature and/or high altitude may cause tire pressures to
TACHOMETER
NOTE:
See Owner's Manual for more
details and explanations.
Seat Belt Unbuckled/
Malfunction
Turn Signals/Hazard
Warning Indicator Lights
Tire Pressure Monitoring System
(TPMS) Warning Light
On/Warning Beep: Low tire pressure in one
or more tires. Flashing: TPMS Malfunction
Cruise Main Indicator Light
On (AMBER)/Cruise Set
Indicator Light On (GREEN)
ABS (Antilock Brake
System) Malfunction
Shift Position Indicator Light
Security Indicator Light
Brake Warning Light
Parking brake on/low brake
fluid/malfunction
(p. 7)