Husqvarna iZE 4821 Operator's Manual page 37

5. Front Wheel Mount
Lubricate with a grease gun, 1 nipple for each
wheel mount, until the grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
6. Front Wheel Bearings
Lubricate with a grease gun, 1 nipple for each
set of wheel bearings, until the grease is forced
out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
7. Belt Adjuster, Mower Deck
Remove the foot plate (two screws) and
lubricate with a grease gun, 1 nipple, until
grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
IMPORTANT INFORMATION
Be spartan and remove excess lubricant so
that is does not come into contact with
belts or belt pulley drive surfaces.
8. Mower Deck Height Adjuster
Lubricate using a grease gun, 1 nipple,
until the grease squeezes out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
LUBRICATION
Lubricating the front wheels
The belt adjuster grease nipple
Lubricating the cutting height adjuster
8011-573
8011-576
8011-574
37
English-