Honda CRF110F 2013 Owner's Manual page 102

12/06/22 14:16:59 31KYKA00_102
Adjustment
RIGHT REAR
(2) adjusting nut
(3) brake arm pin
1. Adjust by turning the rear brake adjusting
nut ( ) a half-turn at a time. Make sure the 2
cut-out on the adjusting nut is seated on the
brake arm pin ( ).
2. Apply the brake, release it, and then spin the
wheel and check that it rotates freely. Repeat
this procedure several times.
(2)
( ( − − ) )
( ( ＋ ＋ ) )
(3)
( ) increase freeplay ＋
( ) decrease freeplay −
3
3. Check the freeplay. If you can't adjust the
freeplay properly, see your dealer.
After adjustment, push the brake arm ( ) to
confirm that there is a gap between the
adjusting nut ( ) and the brake arm pin ( ). 2
(2)
(2) adjusting nut
(3) brake arm pin
After adjustment, confirm the freeplay of the
brake pedal.
Servicing Your Honda
Brakes
4
3
(3)
(4)
(4) brake arm
93