Programming Features
You can change the following features by entering the programming mode (k).
To talk with someone on your two-way radios, these settings must match:
•
Channel
•
Frequency
•
Interference Eliminator Code
•
Scramble code
•
Bandwidth (for optimal clarity)
You can also use k to set the following:
•
Call tones
•
Microphone Gain
•
Scan List
•
Available channels
Note: You cannot enter kwhile a VOX accessory is plugged into the radio.
Entering Programming Mode
You must enter Programming Mode to change your communication settings.
1. Press and hold MJ for three seconds while turning on your
radio. The radio beeps and displays k.
1
23