Fujitsu ScanSnap iX100 Basic Operation Manual page 47

l When the ScanSnap is turned on, a notification window notifies you of the ScanSnap's
communication status.
To disable notifications of the ScanSnap's communication status, change the setting in the
following procedure:
1. Click the ScanSnap Manager icon
the keyboard, and then select [Preferences] from the
42).
a The [ScanSnap Manager - Preferences] window appears.
2. Clear the [Notify of the communication status] checkbox in the [Status Display] list.
in the Dock while holding down the [control] key on
"ScanSnap Manager Menu" (page
47
Turning the ScanSnap On or Off