Led/Button/Volume Knob Test Mode (Non Keypad Models); Table 4-2. Radio Operation In Test Mode - Non Keypad Models - Motorola CP185 Basic Service Manual

Performance Checks: LED/Button/Volume Knob Test Mode (Non Keypad Models)
4.4

LED/Button/Volume Knob Test Mode (Non Keypad Models)

1. Make sure the radio is turned off.
2. Turn on the radio and immediately press Side Programmable Button 2 (SPB2) 3 times. The
LED turns solid red.
3. The radio will operate as shown in Table 4-2. if any key is pressed while in test mode.
Button
PTT Button
(Push-To-Talk Button)
SPB1
(Side Programmable Button 1)
SPB2
(Side Programmable Button 2)
Table 4-2. Radio Operation in Test Mode – Non Keypad Models
Solid Amber
Solid Green
Solid Red
LED
Continuous tone; volume increases/
decreases by turning the Volume Knob
clockwise/ counterclockwise.
Note: Press SPB2 to turn continuous tone
OFF.
Continuous tone OFF if previously ON.
Tone
4-3