Icom IC-F3230D series Instruction Manual page 19

D AD-106 installation
The AD-106
charger adapter
119N or BC-121N before battery charging.
➥ Connect the AD-106
charger adapter
BC-121N as shown below, then install the AD-106 into the
holder space of the BC-119N or BC-121N with the sup-
plied screws.
AD-106
Plugs
* This illustration is of the BC-119N.
must be installed into the BC-
and the BC-119N/
Connectors
Screws supplied
with the charger
adapter
BATTERY CHARGING
D Rapid charging with the BC-119N+AD-106
The optional BC-119N rapidly charges the Li-ion battery
pack. The following items are additionally required.
• AD-106 charger adapter
• A power adapter (may be supplied with the BC-119N, de-
pending on the version) or the DC power cable (OPC-515L/
CP-23L).
Battery
Power adapter
pack
(Not supplied with
some versions.)
Optional OPC-515L *
(for 13.8 V power
source) or CP-23L
(for 12 V cigarette
lighter socket) can
be used instead of
the power adapter.
* CAUTION: NEVER reverse the cable polarity
when connecting the OPC-515L to a power
source. This will ruin the battery charger.
White line: Black line :
4
Transceiver
Turn OFF the power
AD-106 charger
adapter is installed
in BC-119N.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
14