Bad Boy Ambush iS Owner's Manual page 77

RUNNING
SPEED CONTROL LEVER
After the engine starts, set the
speed control lever at the low
speed position and warm it up
without load for a few minutes.
Gradually move the speed control
lever toward the high speed
position and set it at the required
engine speed.
NOTE :
Whenever high speed operation is
not required, slow the engine
down (idle) by moving the speed
control lever to save fuel and
extend engine life.
STOPPING
SPEED CONTROL LEVER
1
Set the speed control lever at the
low speed position and allow the
engine to run at low speed for 2 or
3 minutes before stopping.
ELECTRIC STARTER
2
Turn the key switch to the "STOP"
position.
FUEL VALVE
3
Close the fuel valve.
− 10−
STOP
OFF
RUN
START