Using The Static Gamma Feature; Using The Auto Aspect Ratio Feature - Toshiba 19AV500U Owner's Manual

~=== l~~"~~ ~~ ;~~~--:;_>:, ~!II'~!F'~;1"!~1~j"'(1:11"'''''''~''J''
Chapte;7: Using the TV's adranced fetitures
Using the static gamma feature Using the auto aspect ratio feature
..
Note: The auto aspect ratio feature is not applicable to
antenna or cable input sources.
Full
Natural (with sidebars)
The current picture size you set under
"Selecting the picture size" on page 33.
Automatic aspect size (automatically
selected when Auto Aspect is On)
4:3 normal
16:9 full
Not defined
(no ID-l data
orHDMI
aspect data)
Aspect ratio of
signal source
To turn on the auto aspect ratio feature:
1
Press
MOU
and open the Video menu.
2
Highlight Advanced Picture and press
~
or
8.
3
Highlight Auto Aspect Ratio and press
~
or
8
to
select On or Off.
When the auto aspect ratio feature is set to On, the TV
will automatically select the picture size when one of the
following input sources is received:
• A 480i signal from the VIDEO,input.
• A 480i, 480p, nop, 1080i signal from the HDMI input.
• If the setting is moved in the minus direction, the detail
of black colors will be decreased.
• If the setting is moved in the plus direction, the detail of
black colors will be increased.
Note: If you select one of the factory-set picture modes
(Sports, Standard or Movie) and then change the static
gamma setting, the picture mode automatically changes
to Preference.
4
In the Static Gamma field, press
~
or
~
to adjust the
static gamma.
The adjustment range is within ±5 from center.
The static gamma feature allows you to adjust the levels of
black in the picture.
To adjust the static gamma settings:
1
Press
MOU
and open the Video menu.
2
Highlight Advanced Picture and press
~
or
8.
3
Highlight Static Gamma and press
8,
a new
adjustment bar will appear as below.
To turn off the auto aspect ratio feature:
Select Off in step 3 above.
I
44