Mounting The Nüvi On The Windshield - Garmin nuvi 310 Owner's Manual

Personal travel assistant
Hide thumbs Also See for nuvi 310:
Table of Contents

Advertisement

G
s
ettInG
tarted
Mounting the nüvi on the Windshield
Check your state and local traffic laws before mounting. Currently, state laws in California and Minnesota prohibit
drivers from using suction mounts on their windshields while operating motor vehicles. Other Garmin dashboard or
friction mounting options should be used. See the Important Safety and Product Information guide for more details.
If you want to mount the nüvi on your dashboard instead, see
To mount the nüvi using the suction cup mount:
1. Plug the power cable into the back of the mount. Plug the other end into a
12/24-Volt receptacle in your vehicle.
2. Clean and dry your windshield and the suction cup with a lint-free cloth. Place
the suction cup on the windshield.
3. Flip the lever back, toward the windshield.
4. Flip up the GPS antenna. Fit the bottom of your nüvi into the cradle.
5. Tilt the nüvi back until it snaps into place.
If you use an external microphone (optional), plug it into the right side of the cradle.
To remove your nüvi from the cradle, press the small tab on the bottom of the cradle
up, and tilt the nüvi forward.

Windshield
nüvi 310/360/370 Owner's Manual
page
55.
Microphone
jack

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nuvi 370Nuvi 360

Table of Contents