1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. X200
  6. User manual

Toshiba X200 Series User Manual

Hide thumbs Also See for X200 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
X200 Series
computers.toshiba-europe.com

Advertisement

Table of Contents
loading

Related Manuals for Toshiba X200 Series

Summary of Contents for Toshiba X200 Series

  • Page 1 User’s Manual X200 Series computers.toshiba-europe.com...
  • Page 2 © 2007 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 3: Safety Instructions

    X200 Series Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S.
  • Page 4 X200 Series ■ Use only the AC adapter and batteries that are approved for use with this computer. Use of another type of battery or AC adapter may risk fire or explosion. ■ Before you connect the computer to a power source, ensure that the voltage rating of the AC adapter matches that of the available power source.
  • Page 5 Use only the battery pack that came with the computer or an optional battery pack. Use of the wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. EU Declaration of Conformity This product is carrying the CE-Mark in accordance with the related European Directives.

  • Page 6: Working Environment

    EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected / implemented those options / cables have to provide assurance that the system (PC plus options / cables) still fulfils the required standards.
  • Page 7 X200 Series GOST Following information is only for EU-member states: The symbol indicates that this product may not be treated as household waste. Please ensure this product is properly disposed as inappropriate waste handling of this product may cause potential hazards to the environment and human health.
  • Page 8 X200 Series In other countries, the drive is certified to comply with the requirement pursant to IEC 825 and EN60825 on class 1 laser product. This computer is equipped with one of the optical drive in the following list according to the model.
  • Page 9 X200 Series TOSHIBA Samsung Storage Technology TS-L632D ■ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 10 X200 Series Hitachi-LG Data Storage DVD Super Multi GSA-T20N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 11 X200 Series Panasonic DVD Super Multi UJ-850U ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 12 X200 Series TEAC DV-W28EC ■ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 13 X200 Series TOSHIBA HD DVD-ROM TS-L802A ■ The HD DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 14 X200 Series TOSHIBA HD DVD-R SD-L902A ■ The HD DVD-R drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 15 X200 Series International Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station".
  • Page 16 X200 Series VORSICHT: DIE VERWENDUNG VON ANDEREN STEURUNGEN ODER EINSTELLUNGEN ODER DAS DURCHFÜHREN VON ANDEREN VORGÄNGEN ALS IN DER BEDIENUNGSANLEITUNG BESCHRIEBEN KÖNNEN GEFÄHRLICHE STRAHLENEXPOSITIONEN ZUR FOLGE HABEN. Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN).

  • Page 17: Important Notice

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.

  • Page 18: Instruction Manual For Safety And Comfort

    X200 Series Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical...

  • Page 19: Table Of Contents

    Special features ......... . 1-9 TOSHIBA Value Added Package ......1-11 Utilities and Applications.
  • Page 20 TOSHIBA Disc Creator ........4-24...
  • Page 21 TOSHIBA support ........

  • Page 22: Display Modes

    X200 Series Disclaimers Chapter 11 CPU ........... 11-1 Memory (Main System) .

  • Page 23: Manual Contents

    This manual tells how to set up and begin using you X200 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
  • Page 24 Chapter 7, Power and Power-Up Modes, gives details on the computer's power resources. Chapter 8, Setup, introduces you to the TOSHIBA Hardware Setup program. Chapter 9, Optional Devicess, describes the optional hardware available. Chapter 10, Troubleshooting, provides helpful information on how to perform some diagnostic tests, and suggests courses of action if the computer doesn't seem to be working properly.

  • Page 25: Equipment Checklist

    Carefully unpack your computer. Save the box and packing materials for future use. Check to make sure you have all the following items: Hardware ■ X200 Series Portable Personal Computer ■ Universal AC Adapter and Power Cord ■ USB Floppy Disk Drive (provided with some models) ■...
  • Page 26 The system may not function properly if you use drivers that are not pre- installed or distributed by TOSHIBA. SD Memory Card Format Utility and other SD functions are packaged into TOSHIBA SD Memoory Utilities. When uninstalling the SD utilities, click Start Control Panel Programs and select TOSHIBA SD Memory Utilities.

  • Page 27: Chapter 1 X200 Series Features

    Basic features are described in a separate pamphlet. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Features Please visit your region's web site for the configuration details of the model that you have purchased.
  • Page 28 X200 Series Features Memory The graphics system in your computer may use part of the main system memory for graphics performance and therefore reduce the amount of system memory available for other computing activities. The amount of system memory allocated to support graphics may vary depending on the graphics system, applications utilized, system memory size and other factors.
  • Page 29 X200 Series Features Disclaimer (Battery Life) For more information on the Disclaimer regarding Battery Life, please refer to the Disclaimers section in Chapter 11. RTC Battery The computer has an internal battery to back up its Real Time Clock (RTC), calender and setup information.
  • Page 30 X200 Series Features Disclaimer (LCD) For more information on the Disclaimer regarding LCD, please refer to the Disclaimers section in Chapter 11. ® Graphics controller NVIDIA GeForce Go 8700M GT (Graphics controller chipset depends on the model purchased) The graphics controller maximizes display performance.
  • Page 31 X200 Series Features Disclaimer (HDD Drive Capacity) For more information on the Disclaimer regarding HDD Drive Capacity, please refer to the Disclaimers section in Chapter 11. DVD Super Multi drive Some models are equipped with a full-size DVD supporting R Double Super Multi drive supporting ±R Double Layer...
  • Page 32 X200 Series Features HD DVD-ROM drive HD DVD-ROM reads HD DVD-ROMs at maximum 1x speed DVD-ROMs at maximum 8x speed and CD-ROMs at maximum 24x speed. It writes CD-Rs at up to 16x speed, CD-RWs at up to 10x speed, DVD-Rs at maximum 4x speed,...
  • Page 33 X200 Series Features HD DVD-R drive HD DVD-R reads HD DVD-ROMs at maximum 1x speed HD DVD-Rs at maximum 1x speed DVD-ROMs at maximum 8x speed and CD-ROMs at maximum 24x speed. It writes CD-Rs at up to 16x speed, CD-RWs at up to 10x speed, DVD-Rs...
  • Page 34 X200 Series Features Ports (depending on configuration) External monitor 15-pin analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus The computer has Six Universal Serial Bus (USB) ports that comply with the USB 2.0 standard, which enables data transfer speeds more than 40 times faster than USB 1.1 (which this...

  • Page 35: Security Lock Slot

    Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Key combinations that let you quickly modify the system configuration directly from the keyboard without running a system configuration program.
  • Page 36 Power is restored when the hard disk is accessed. You can specify the time period in the TOSHIBA Power Saver utility. System Automatic This feature automatically places the system into...

  • Page 37: Toshiba Value Added Package

    ■ TOSHIBA utility launcher function When you start or resume your computer, the TOSHIBA Flash Cards may take a moment to become available and may display several times before completely activating. The hot key functions will be available once the TOSHIBA Cards are completely active.

  • Page 38: Utilities And Applications

    DVD Video titles. Make sure to connect the computer’s AC adaptor when playing a DVD Video. Power-saving features may interfere with smooth playback. TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find...
  • Page 39 X200 Series Features TOSHIBA DVD-RAM TOSHIBA DVD-RAM Utility has the function of Utility Physical Format and Write-Protect to DVD-RAM. This utility is contained in the setup module of TOSHIBA Disc Creator. You can start TOSHIBA DVD-RAM Utility from the menu bar as follows.

  • Page 40: Options

    ■ TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. Options You can add a number of options to make your computer even more powerful and convenient to use.

  • Page 41: Chapter 2 The Grand Tour

    The Grand Tour Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
  • Page 42 The Grand Tour Front Edge Logo* Front Edge Logo indicates the computer series you bought. (The avaliability of this function is dependent on the model you purchased.) DC IN LED The DC IN LED indicates the computer is connected to the AC adapter and it is plugged into an AC power source.

  • Page 43: Right Side

    The Grand Tour Headphone Jack The headphone jack lets you connect stereo headphones or other audio-output devices such as external speakers. Connecting headphones or other devices to this jack automatically disables the internal speakers. Volume Control Use this dial to adjust the volume of the stereo speakers or headphones.

  • Page 44: Left Side

    The Grand Tour Optical Disc Drive and The computer is configured with a full-size optical disc drive module that lets you run either 12 cm (4.72") or 8 cm (3.15") discs without using an adapter. See the Drives section in this chapter for technical specifications on each drive and Chapter 4, Operating...

  • Page 45: Back Side

    The Grand Tour To prevent possible over heating of the CPU, never block the fan vents. LAN Jack This jack lets you connect to a LAN. The adapter has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).

  • Page 46: Underside

    The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Battery Pack HDD2* Battery Pack Lock Expansion Memory Socket Fan Vent Fan Vent Subwoofer Battery Pack Latch HDD1 * The availability of this feature is dependent on the model you purchased.

  • Page 47: Front With The Display Open

    The Grand Tour Expansion Memory Use this socket to install a memory module to Socket increase your computer's memory. Refer to the Memory expansion section in Chapter 9, Optional Devices. To prevent possible overheating of the CPU, never block the fan vents. Battery Pack Latch With the Battery Pack Lock in its unlocked position, you can slide this latch in order to...
  • Page 48 The Grand Tour Display Screen The LCD displays high-contrast text and graphics at a resolution up to 1680 × 1050 pixels. Refer to Appendix B - Display Modes for further information. When the computer operates from the AC adapter, the display screen's image will be somewhat brighter than when it operates on battery power - this is normal and is designed to conserve battery power.
  • Page 49 The Grand Tour Stop* Stops playing the CD, DVD or digital audio. (The availability of this function depends on the model you purchased.) Previous Button* Skips backwards to the previous track, chapter or digital file. Refer to Chapter 4, Operating Basics, for details.

  • Page 50: Keyboard Indicators

    China Writable discs This section describes the types of writable discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics.
  • Page 51 The Grand Tour ■ CD-R discs can be written only once. The recorded data cannot be erased or changed. ■ CD-RW discs can be recorded more than once. Use either 1x, 2x, or 4x multi-speed CD-RW discs or high-speed 4x to 10x discs. The write speed of ultra-speed CD-RW discs is a maximum of 24x speed.
  • Page 52 The Grand Tour HD DVD-ROM drive The HD DVD-ROM supporting ±R Double Layer module lets you record data to rewritable discs as well as run either 12 cm (4.72") or 8 cm (3.15") discs without using an adapter. The read speed is slower at the centre of a disc and faster at the outer edge.
  • Page 53 Power and Power-Up Modes, for details. The AC adapter Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. Please use only the AC Adapter supplied with the computer or an AC adapter certified by TOSHIBA.

  • Page 54: Chapter 3 Getting Started

    AC adapter to charge the battery pack, refer to Chapter 7, Power and Power-Up Modes. Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. User’s Manual...
  • Page 55 Getting Started 1. Connect the power cord to the AC adapter. Connecting the power cord to the AC adapter 2. Connect the DC output plug on the AC adapter to the DC IN input port on the back of the computer. Connecting the adapter to the computer 3.

  • Page 56: Opening The Display

    Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer. Opening the display 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel.

  • Page 57: Starting Up For The First Time

    Getting Started Starting up for the first time When you first turn on the power, the computer's initial screen is the ® Windows Vista Startup Screen Logo. Follow the on-screen directions for each screen. During setup, you can click the Back button to return to the previous screen.
  • Page 58 Getting Started ■ When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options. ■ To restore the operation from the computer from Sleep Mode, press the power button or press any key. Please be aware that this latter action only works on the internal keyboard if the.

  • Page 59: Hibernation Mode

    Getting Started 3. Press the power button. Please note that this feature must be enabled - please refer to the Power Options (to access it, click Start Control Panel System and Maintenance Power Options Choose what the power button do). When you turn the power back on, you can continue where you left when you shutdown the computer.

  • Page 60: Starting Hibernation Mode

    Getting Started Starting Hibernation Mode You can also enable Hibernation Mode by pressing Fn + F4 - please refer to Chapter 6, Keyboard, for further details. To enter Hibernation Mode, follow the steps below. 1. Click Start. 2. Click the arrow button ( ) in the power management buttons 3.

  • Page 61: Restarting The Computer

    Getting Started Restarting the computer Certain conditions require that you reset the computer, for example if: ■ You change certain computer settings. ■ An errors and the computer does not respond you your keyboard commands. If you need to restart the computer, there are three ways this can be achieved: 1.

  • Page 62: Restoring The Pre-Installed Software From The Product Recovery Disc

    2. Switch on the computer and, when the In Touch with Tomorrow TOSHIBA prompt appears, press the F12 key to display the Boot Menu. For 2HDD Model, If HDD1 is first, go to step 3. If HDD1 is not first, do as follows: ■...

  • Page 63: Chapter 4 Operating Basics

    Operating Basics Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad/Dual Mode Pad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal.

  • Page 64: Dual Mode Pad Button Function (Dual Mode Pad Is Provided With Some Models)

    Operating Basics The TouchPad/Dual Mode Pad has similar functions to a two-button mouse with a scroll wheel. For some functions, you can tap it instead of pressing a button. You can customize pointing device actions in Mouse Properties. Open the Control Panel, select the Mouse icon and press Enter to open the Mouse Properties window.

  • Page 65: Using The Fingerprint (Fingerprint Sensor Is Provided With Some Models)

    Operating Basics Configfree Configfree is a suite of utilities to allow easy control of communication devices and network connections. It also allows you to find communication problems and create profiles for easy switching between locations and communication networks. Windows Photo Windows Photo Gallery gives you many tools for Gallery your digital photos and videos.

  • Page 66: Points To Note About The Fingerprint Sensor

    Operating Basics How the Swipe the Finger Using the following steps when swiping fingers for FingerPrint registration or authentication will help to minimize authentication failures: 1. Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you.
  • Page 67 Operating Basics ■ Do not press the sensor strongly. ■ Do not touch the sensor with a wet finger or any wet objects - keep sensor surface dry and free of water vapor. ■ Do not touch the sensor with a soiled or dirty finger as minute foreign particles of dust and dirt may scratch it.

  • Page 68: Points To Note About The Fingerprint Utility Software

    Toshiba does not guarantee that the FingerPrint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this FingerPrint recognition software or utility.

  • Page 69: Set Up Procedure

    Operating Basics If Windows Vista™’s file encryption function EFS (Encryption File System) is used to encrypt a file, the file cannot be further encrypted using the encryption function of this software. In the help file, it is stated that this software's Password Bank function can be used for the Internet and general applications.

  • Page 70: Window Logon Via Fingerprint Authentication

    Operating Basics 7. At the User’s Fingers screen, select the finger you wish to enroll from the illustration and then click Next. On this screen please be aware that any previously enrolled FingerPrints would have green check marks, while the FingerPrint you are about to enroll will have a red check mark. If any of the previously enrolled FingerPrints is selected again, the latest information will be enrolled and any previous information over-written.
  • Page 71 Operating Basics ■ You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the FingerPrint Power-on Security and its extended function to allow FingerPrint to be used to access the computer when it is turned on.

  • Page 72: Fingerprint Utility Limitations

    TOSHIBA does not guarantee that the FingerPrint utility technology will be completely secure or error-free or it will be accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the FingerPrint software.

  • Page 73: Using The Web Camera

    Operating Basics Using the Web Camera This section describes the bundled Web Camera utility, which can Snapshot and video images. The Web Camera will auto-run when Windows starts. Web Camera Led Web Camera Lens User’s Manual 4-11...

  • Page 74: Using The Software

    Operating Basics Using the software The Web Camera software is pre-configured to start when you turn on Windows Vista™; if you need to restart it go to Start Programs Camera Assistant Software Camera Assistant Software. Capture still images Display Window Video Recording Camera Resolution Audio Recording...

  • Page 75: Using The Internal Modem

    Operating Basics Settings Choose from the: Options tab to change the tool position; the Picture tab to select picture output options such as size, export file and saving location; the Video tab to choose output settings such as Frame Rate, Size, Compression and the file save path;...

  • Page 76: Region Selection

    1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA Networking Modem Region Select.

  • Page 77: Modem Selection

    Operating Basics Settings You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialling Properties dialogue box after selecting region The dialling properties dialogue box will be displayed automatically after you select the region.

  • Page 78: Lan

    If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the TOSHIBA Power Saver utility. Disconnecting To disconnect the internal modem cable, follow the steps below.

  • Page 79: Disconnecting The Lan Cable

    Operating Basics If you are using 100BASE-TX Fast Ethernet or 1000BASE-T Gigabit Ethernet, you must connect using a CAT5 cable. To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer.

  • Page 80: Bluetooth Wireless Technology

    Internet is an open invitation for outsiders to abuse your ISP account and privileges. 2. TOSHIBA is not liable for the eavesdropping on your data due to the use of the wireless LAN connection and any damage that may occur thereof.

  • Page 81: Product Support

    ® ® This Bluetooth Stack is based on Bluetooth Version 1.1/1.2/2.0+EDR specification. TOSHIBA cannot confirm compatibility between any PC products and/or other electronic devices that use Bluetooth™ other than TOSHIBA mobile PCs. ® Release Notes related to the Bluetooth Stack for ®...

  • Page 82: Wireless Communication Led

    Operating Basics Wireless communication LED The LED indicates the status of the wireless communication functions. LED status Indication LED off Wireless communication switch is set to off. LED glows Wireless communication switch is on. Using optical disc drives The illustrations in this section might differ slightly from your drive, but operation is the same for all optical disc drives.
  • Page 83 Operating Basics Manual release with the eject hole 3. Grasp the drawer gently and pull until it is fully open. Pulling the drawer open 4. Lay the disc, label side up, in the drawer. Inserting a disc User’s Manual 4-21...
  • Page 84 Operating Basics Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5. Press gently at the centre of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with its base. 6.
  • Page 85 2. "Button Support" white card fully appears. After double click this card, the dialog for changing button function is displayed. 3. Change function of Buttons. Or you can go to 1. Start/All programs/TOSHIBA/Utilities and select Toshiba Assist. 2. Choose optimize from left panel then select TOSHIBA Button Controls.

  • Page 86: Toshiba Disc Creator

    TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the "Disc Backup" function of TOSHIBA Disc Creator to backup a DVD-R/-RW or DVD+R/+RW disc that was made with other software on a different DVD-R/-RW or DVD+R/+RW recorder.

  • Page 87: Data Verification

    Operating Basics ■ When you back up a DVD disc, be sure the source drive supports recording to DVD-R/-RW or DVD+R/+RW discs. If the source drive does not support recording to DVD-R/-RW or DVD+R/+RW discs, it might not be backed up correctly. ■...

  • Page 88: Discs

    Operating Basics Discs 1. Store your disks in the container they came in to protect them and keep them clean. If a disk is dirty, do not use cleaning fluid. Clean it with a soft damp cloth. 2. Do not slide back the disk's protective metal covering or touch the disk's magnetic surface.

  • Page 89: Setting Up More Than One Display

    Operating Basics Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors. The Display settings window allows you to adjust more precisely the relative positioning of the two displays when they are configured as an extended desktop.

  • Page 90: Moving The Computer

    Operating Basics Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation. ■ Make sure all disk activity has ended before moving the computer. Check the Built-in Hard Disk Drive and optical disc drive indicators on the computer.

  • Page 91: Chapter 5 About The Hd Dvd

    About the HD DVD Chapter 5 About the HD DVD This chapter describes the features, use of HD DVD and HD DVD Media. HD DVD is provided with some models. Summary HD DVD allows users to enjoy video, concerts and other packaged content by taking advantage of its large amount of storage space and high-quality audio and video.
  • Page 92 About the HD DVD ■ HD DVD is a new standard which makes use of new technologies. As such, there is a possibility of problems occurring related to connection, compatibility or operation with some discs and other digital devices. The HD DVD-ROM logo signifies that this drive complies with the HD DVD physical standard, and does not signify compliance with the HD DVD Video standard.

  • Page 93: Using Toshiba Hd Dvd Player To Enjoy Hd Dvds

    HD DVD Playback Restrictions HD DVD-ROM drive and HD DVD-R drive allow users to enjoy the strong visuals of HD DVD-Video. "TOSHIBA HD DVD PLAYER" software is provided for playback of HD DVD-Video. Important information on use HD DVD Playback ■...
  • Page 94 HD DVD Video playback. ■ HD DVD Video playback may take several moments to begin. ■ When playing an HD DVD (Twin format disc), run it from the "TOSHIBA HD DVD Launcher Menu". When Using ■...
  • Page 95 Display Devices & Audio ■ "TOSHIBA HD DVD PLAYER" will only run when "Colors" is set to "Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings". To open the Display Settings, click Start...
  • Page 96 Print Screen functions are disabled even when running other applications besides "TOSHIBA HD DVD PLAYER" and when "TOSHIBA HD DVD PLAYER" is minimized. Please close the "TOSHIBA HD DVD PLAYER" to use the Print Screen function. ■ Carry out the installation/uninstallation of the "TOSHIBA HD DVD PLAYER"...

  • Page 97: Using Toshiba Hd Dvd Player

    2. Touch the CD/DVD panel on the Front operation panel. Or select Start All Programs TOSHIBA HD DVD PLAYER to start "TOSHIBA HD DVD PLAYER". The TOSHIBA DVD PLAYER can also be started from the Media Center top menu. User’s Manual...

  • Page 98: Operating Toshiba Hd Dvd Player

    About the HD DVD Operating TOSHIBA HD DVD PLAYER Important information on using "TOSHIBA HD DVD PLAYER". ■ The HD DVD standard defines A, B, C and D buttons, and some software may display "Press the A button" or similar messages. If a message of this type appears, use the following corresponding keyboard keys.

  • Page 99: Toshiba Hd Dvd Player Control Window

    Open TOSHIBA HD DVD PLAYER HELP TOSHIBA HD DVD PLAYER features and instructions are also explained in detail in "TOSHIBA HD DVD PLAYER Help". Use the following procedure to open "TOSHIBA HD DVD PLAYER Help". 1. Click the "Help" button ( ) in the Display Area.
  • Page 100 One-touch Replay One-touch Skip Stop Fast Rewind Play Fast Forward Pause Slow Motion TOSHIBA HD DVD PLAYER Control window (2) Eject Opens the disc tray. Previous Chapter Jumps to the previous chapter. Next Chapter Jumps to the next chapter. One-touch Replay Rewinds by a specified amount of time and continues playback from that position.

  • Page 101: Using The Computer In Place Of An Hd Dvd Player

    *1: Displayed when an HD DVD (Twin format disc) is placed in the optical disc drive. Using the Computer in place of an HD DVD Player Videos played using "TOSHIBA HD DVD PLAYER" included with the computer can be displayed on a television equipped with an HDMI input port.

  • Page 102: Before Connecting

    Not all televisions equipped with an HDMI input port have been tested for compatibility with this product. As such, Toshiba cannot guarantee that HD DVD-Video content can be displayed on all televisions equipped with an HDMI input port. HD DVD-Video content may not display properly on some televisions.

  • Page 103: Hd Dvd-R Disc Writing Software

    HD DVD-R discs. Ulead DVD MovieFactory can be used to write files in video format. TOSHIBA Disc Creator can be used to write data. Refer to the manuals or help files included with the software for detailed usage instructions.

  • Page 104: Writing Cds/Dvds On A Dvd Super Multi Drive Or Hd Dvd-Rom Drive Supporting Double Layer Disc Recording

    ® TOSHIBA Disc Creator/Direct Disc Writer. Ulead DVD MovieFactory TOSHIBA, which is a product of Ulead Systems, Inc. Important message Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM media, read and follow all set-up and operating instructions in this section.

  • Page 105: Before Writing Or Rewriting

    Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 106 About the HD DVD ■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it. ■ The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM is affected by the quality of the disc and the way it is used.

  • Page 107: When Writing Or Rewriting

    Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator or Ulead DVD ® MovieFactory for TOSHIBA has not been confirmed.

  • Page 108: Writing Cds/Dvds/Hd Dvds On A Hd Dvd-R Drive

    1. Insert a Labelflash™ disc in DVD drive. Set printable surface for underside. 2. Click Start All Programs DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 3. Click Print Disc Label Label Printing. Ulead Label@Onece is started.
  • Page 109 Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW, DVD-R/+R/-RW/+RW/-RAM and HD DVD-R media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 110 About the HD DVD HD DVD-R Hitachi Maxell Ltd. (Single Layer) MITSUBISHI KAGAKU MEDIA CO., LTD HD DVD-R MITSUBISHI KAGAKU MEDIA CO., LTD (Dual Layer) ■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur.
  • Page 111 Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator or Ulead DVD ® MovieFactory for TOSHIBA has not been confirmed.

  • Page 112: When Using Ulead Dvd Moviefactory® For Toshiba

    DV-Camcorder: 1. Click Start All Programs DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Insert a DVD-RW or DVD+RW disc in Burner. 3. Click Video Disc Burn Video to Disc to launch Direct Recording dialog box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.
  • Page 113 About the HD DVD ■ Do not enter Sleep/Hibernation Mode while using DVD MovieFactory. ■ Do not operate DVD MovieFactory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped. ■ When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data.

  • Page 114: Chapter 6 The Keyboard

    The Keyboard Chapter 6 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard. By pressing some keys in combination, all the 104/105-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with.

  • Page 115: Soft Keys: Fn Key Combinations

    Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 116: Hotkeys

    2 key while holding down the Fn key. Before using Fn + 1 and Fn + 2, you must install the TOSHIBA Zooming Utility. Please be aware that this 'zooming' function is only available within Microsoft Internet Explorer, Microsoft Office, Windows Media Player and Adobe Reader, and for the icons on the desktop.

  • Page 117: Windows Special Keys

    The Keyboard Windows special keys The keyboard provides two keys that have special functions in Windows Vista™. One activates the Start menu and the other has the same function as the secondary mouse button. This key activates the Windows Vista™ Start menu This key has the same function as the Right mouse button.

  • Page 118: Chapter 7 Power And Power-Up Modes

    Power and Power-Up Modes Chapter 7 Power and Power-Up Modes The computer's power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.

  • Page 119: Power Indicators

    DC IN off Battery capacity Computer goes into exhausted Hibernation or shuts down (depending on the TOSHIBA Power Saver setting) No battery • No operation installed • LED: Battery off DC IN off * The LED is dependent on the model you purchased.

  • Page 120: Power Indicator

    Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adapter connected: Indicates the AC adapter is connected and is correctly supplying power to the computer. No light Indicates the AC adapter is not connected. Power indicator Check the Power indicator to determine the power status with the AC adapter connected:...

  • Page 121: Real Time Clock Battery

    Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 122: Safety Precautions

    Power and Power-Up Modes Safety precautions Mishandling of batteries can cause death, serious injury or property damage. Carefully observe the following advice: Danger: Indicates an imminently hazardous situation, which could result in death or serious injury, if you do not follow instructions. Warning: Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions.
  • Page 123 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.

  • Page 124: Charging The Batteries

    Power and Power-Up Modes Note 1. Never remove the battery pack while the Wake-up on LAN function is enabled. Data will be lost. Before you remove a battery pack, disable the Wake-up on LAN function. 2. To ensure the battery pack maintains maximum capacity, operate the computer on battery power once a week until the battery pack is fully discharged.

  • Page 125: Battery Charging Notice

    Power and Power-Up Modes The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer. If you make heavy use of external devices the battery might scarcely charge at all during operation.

  • Page 126: Maximizing Battery Operating Time

    Power and Power-Up Modes ■ You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time. This is because the computer needs this time to check the battery’s remaining capacity and then calculate the remaining operating time, based on this together with the current power consumption.

  • Page 127: Extending Battery Life

    Power and Power-Up Modes Retaining data with power off (sleep mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery Approximately 1.5 days (Sleep mode,9-cell) Approximately 1 month (Shut down mode, all type of battery packs) RTC battery Approximately 1 month...

  • Page 128: Installing The Battery Pack

    The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer.

  • Page 129: Toshiba Password Utility

    4. Gently slide the battery into the battery bay until the latch clicks into place. Installing the battery pack TOSHIBA Password Utility The TOSHIBA Supervisor Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from ®...

  • Page 130: Supervisor Password

    Power and Power-Up Modes Supervisor password If you set a supervisor password, some functions will be restricted when a user logs on with the user password. To set a supervisor password: TOSHIBA Assist SECURE Supervisor password This utility lets you do the following: ■...

  • Page 131: Power-Up Modes

    This feature automatically turns off the system in Sleep or Hibernation mode if the computer is not used for a set duration. Refer to Special features, in Chapter 1, X200 Series Features for an explanation of how to set the duration. User’s Manual 7-14...

  • Page 132: Chapter 8 Hw Setup

    General, Password, Display, Boot Priority, Keyboard, CPU, LAN, and USB. Accessing HW Setup Start, point to All Programs, point to TOSHIBA, point to Utilities and click HWSetup. HW Setup Window The HW Setup window contains the following tabs: General, Password, Display, Boot Priority, Keyboard, LAN, and USB.
  • Page 133 HW Setup Password This tab allows you to set or reset the user password for power on. Display This tab lets you customize your computer's display settings for either the internal LCD screen or for an external monitor. Power On Display This option allows you to select the display to be used when the computer is switched on.

  • Page 134: Boot Priority

    HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer. Select the boot priority from the drop down list. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: Selects the USB floppy disk drive.
  • Page 135 HW Setup Wake-up on LAN This feature lets the computer's power be turned on when it receives a wake-up signal from the LAN. Enabled Enables Wake-up on LAN. Disabled Disables Wake-up on LAN (Default). The Wake-up LAN function is not supported on battery power in Hibernate/Power off mode, before you plan to use this function please make sure your AC power source is properly connected to the system.

  • Page 136: Chapter 9 Optional Devices

    Optional Devices Chapter 9 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory ■ Express Card ■...

  • Page 137: Installing An Express Card

    Optional Devices Installing an Express Card One Express Card connector is located on the left side of the computer. The computer's hot-install feature lets you install Express Card while the computer's power is on. To install an Express Card, follow the steps below. 1.

  • Page 138: Sd/Sdhc/Mmc/Ms/Ms Pro/Xd Memory Cards

    Optional Devices SD/SDHC/MMC/MS/MS Pro/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory. Card Type Capacities up to 2 GB...

  • Page 139: Installing A Memory Card

    Optional Devices Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Inserting a memory card Make sure the memory card is oriented properly before you insert it. ®...

  • Page 140: Memory Card Care

    In this case the computer will issue a warning. CAUTION: If you want to upgrade system memory, you should only use certified modules. Ask your vendor or check the TOSHIBA web site for a list of approved memory products. User’s Manual...
  • Page 141 Optional Devices Insert the two memory modules of the same specifications and capacity into Slot A (Upper) and Slot B (Bottom) respectively. The computer will operate in dual channel mode. You can access the inserted memory modules efficiently in dual channel. Point to note about Memory Module Error If you install a memory module that is not compatible with the computer, the Power indicator will flashes (on for 0.5 seconds, off for 0.5 seconds) in the...
  • Page 142 Optional Devices 5. Slide your fingernail or a thin object under the cover and lift it off. Removing the memory module socket cover 6. Fit the module's connectors into the computer's connectors at about a 45 degree angle and press the module carefully to ensure a firm connection.
  • Page 143 Optional Devices Removing Memory on Bottom Side The Slot A is reserved for main memory, the upper slot. Use the slot B for expanded memory, the bottom slot. If only one card is installed, use the slot A. Slot A (Upper Slot), Slot B (Bottom Slot) If you use the computer for a long time, the memory modules will become hot.

  • Page 144: Additional Battery Pack

    Optional Devices Latch Removing the memory module 6. Seat the cover and secure its screw. 7. Replace the battery. Additional battery pack You can increase the portability of the computer with additional battery packs. If you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery.

  • Page 145: Television

    Optional Devices To change the display settings, press Fn + F5. If you disconnect the monitor before you turn the computer off, be sure to press Fn + F5 to switch to the internal display. Refer to Chapter 6, Keyboard, for details on using hot keys to change the display settings.
  • Page 146 Optional Devices 4. Click the Start the NVIDIA Control Panel button. 5. In the NVIDIA Control Panel dialogue box, click Display and then click Change display configuration of Multiple Displays to set up your television and notebook displays. User’s Manual 9-11...

  • Page 147: Hdmi

    Optional Devices HDMI A HDMI monitor can be connected to the HDMI out put on the computer. To connect monitor, follow the steps as detailed below: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors has not be confirmed, some HDMI monitors may not function properly.

  • Page 148: Connecting The Hdmi Out Port

    Optional Devices 3. Click System and Maintenance. (If your control panel is classic view, please double click "NVIDIA Control Panel" directly.) 4. Click NVIDIA Control Panel. 5. If you find NVIDIA Control Panel - Basic View, select Advanced then click Next. 6.
  • Page 149 Optional Devices Settings for display video on HDMI To view video on the HDMI device, be sure to configure the following settings otherwise you may find that nothing is displayed. End user refer page 8-9 and Appendix B-5 for more detail, to out put HDMI device.

  • Page 150: Remote Controller

    Optional Devices Remote Controller Pause Access indictor Record Power Stop Play Fast Forward Rewind Skip Replay Start Back More Info Arrows Mute Volume + Channel/Page Volume - Live TV Guide DVD Menu Recorded TV Numbers Clear Enter Teletext Blue Yellow Green Remote Cotroller User’s Manual...
  • Page 151 Optional Devices Power Starts or terminates the operating system. This button functions like the Power button of your computer. By default, the Sleep Mode is equivalent to the Power Off state of your computer. To change the setting, click Start, select Control Panel System and Maintenance...

  • Page 152: Using The Remote Controller

    Optional Devices Volume - Decreases the volume while watching TV, viewing DVD’s or replaying CD’s. Start Opens Media Center to the main window. Channel/Page up(+) Changes the TV channel or moves a page up and and down(-) down, depending on the available options. Mute Turns your computer sound off.
  • Page 153 Optional Devices Operational range of the Remote Controller Point the Remote controller at your computer and press a button. The operational angle and distance are described below. Distance Within 5m from the infrared receiver window. Angle Within a 30 degree horizontal and 15 degree vertical range oof the infrared receiver window.

  • Page 154: Installing/Removing Batteries

    Optional Devices Installing/Removing batteries Be sure to install the dry batteries provided with this product using the Remote Controller. The procedures for installing and removing the bateries vary depending on the type of the Remote Controller. Check the type and then install or remove the bateries as instructed.

  • Page 155: Installing The Batteries

    Optional Devices Type of battery that can be used for the Remote Controller When batteries shipped with the Remote Controller are discharged, replace them with commercially available AA manganese batteries or AA alkaline batteries. Other types or battery should not be used. Installing the batteries 1.

  • Page 156: Replacing The Batteries

    Optional Devices Battery cover Closing the battery cover Replacing the batteries When the batteries in ther Remote Controller reach the end of their life, the Remote Controller may not operate correctly or work only within a short distance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.

  • Page 157: I.link (Ieee1394A)

    Optional Devices i.LINK (IEEE1394a) i.LINK (IEEE1394a) is used for high-speed data transfer for a range of compatible devices such as: ■ Digital video cameras ■ Hard disk drives ■ MO drives ■ Optical disc drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply.

  • Page 158: Security Lock

    Optional Devices Disconnecting 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Point to i.LINK (IEEE1394a) device and click. 3. Disconnect the cable from the computer then from the i.LINK device. Refer also to the documentation that came with your i.LINK device. Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer.

  • Page 159: Troubleshooting

    Troubleshooting Chapter 10 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 160: Preliminary Checklist

    Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 161: Hardware And System Checklist

    Troubleshooting Record your observations so you can describe them to your dealer. Software The problems may be caused by your software. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software.

  • Page 162: Self Test

    If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or messages except the TOSHIBA logo. ■ Random characters appear on the screen, and the system does not function normally.

  • Page 163: Overheating Power Down

    Troubleshooting Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems.
  • Page 164 Troubleshooting Battery If you suspect a problem with the battery, check the DC IN indicator as well as the indicators for the battery. For information on indicators and battery operation see Chapter 7, Power and Power-Up Modes. Problem Procedure Battery doesn't power The battery may be discharged.

  • Page 165: Lcd Panel

    Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 6, Keyboard. Problem Procedure Output to screen is Make sure the software you are using is not garbled. remapping the keyboard. Remapping involves reassigning the meaning of each key.
  • Page 166 Troubleshooting Password Problem Procedure Cannot enter password. Refer to Chapter 7, Power and Power-Up Modes. i.LINK (IEEE1394) Problem Procedure i.LINK device does not Make sure the cable is securely connected to the function. computer and to the device. Make sure the device's power is turned on. Reinstall the drivers.

  • Page 167: Sound System

    Troubleshooting Problem Procedure No display. Try adjusting the contrast and brightness controls on the external monitor. Press hotkeys Fn + F5 to change the display priority and make sure it is not set for the internal display. Display error occurs. Check that the cable connecting the external monitor to the computer is attached firmly.

  • Page 168: Usb Mouse

    Troubleshooting Problem Procedure Double-tapping does Try changing the double-click speed setting in the not work. mouse control utility. 1. Open the Control Panel, select the Mouse icon and press Enter. 2. Click the Buttons tab. 3. Set the double-click speed as instructed and click OK.

  • Page 169: Tv Output Signal

    Troubleshooting Refer also to your USB device’s documentation. Problem Procedure USB device does not Check for a firm cable connection between the work. USB ports on the computer and the USB device. Make sure the USB device drivers are properly installed.
  • Page 170 Troubleshooting Sleep/Hibernation Problem Procedure The system will not Is Windows Media Player open? The system enter Sleep/Hibernation. might not enter Sleep/Hibernation, if Windows Media Player is either playing a selection or finished playing a selection. Close Windows Media Player before you select Sleep/Hibernation.
  • Page 171 Troubleshooting Problem Procedure After making a call you Make sure the tone or pulse selection in your can't hear a ring. communications application is set correctly. Communication is cut The computer will automatically cut off off unexpectedly. communication when connection with the carrier is not successful for a set time interval.
  • Page 172 DVD Super Multi drive. Cannot write correctly. If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■...
  • Page 173 Troubleshooting HD DVD-R or HD DVD-ROM drive supporting disc recording For more information, refer to Chapter 5, About the HD DVD. Problem Procedure You cannot access a Make sure the drive's drawer is securely closed. CD/DVD/HD DVD in the Press gently until it clicks into place. drive.

  • Page 174: Disk Drive

    Procedure Cannot write correctly. If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 175: Fingerprint Sensor

    1. Make sure you have enroll finger in windows Fingerprint Power on account. Security does not work. 2. Set the User Password by using TOSHIBA Password Utility and restart the system. 3. Make sure place a checkmark in Replace the power-on and hard drive passwords with the fingerprint reader on the Protector Suite QL setting.

  • Page 176: Toshiba Support

    Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.

  • Page 177: Disclaimers

    Disclaimers Chapter 11 Disclaimers This chapter states the Disclaimer(s) information applicable to TOSHIBA computers. Central Processing Unit ("CPU") Performance Disclaimer. CPU performance in your computer product may vary from specifications under the following conditions: ■ use of certain external peripheral products.

  • Page 178: Memory (Main System)

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 179: Hdd Drive Capacity

    Disclaimers HDD Drive Capacity 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and therefore shows less storage capacity.

  • Page 180: Copy Protection

    Disclaimers Copy Protection Copy protection technology included in certain media may prevent or limit recording or viewing of the media. Images All images are simulated for purposes of illustration. LCD Brightness and Eye Strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.

  • Page 181: Specifications

    Specifications Appendix A Specifications This appendix summarizes the computer's technical specifications. Dimensions 399 mm (W) × 288 mm (D) × 52.0 mm (H. Max.) 288mm 36mm 52.0mm User’s Manual...

  • Page 182: Environmental Requirements

    Specifications Weight Starting at 8.42 lbs / 3.82 kg * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C to 35°C 20% to 80% Non-operating -20°C to 65°C Conditions Altitude (from sea level) Operating...
  • Page 183 Specifications Communication Data transmission and reception Speed 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.90/V.92 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/ 56000 bps Fax: 2400/4800/7200/9600/12000/14400 bps Error correcting MNP class 4 and ITU-T V.42 Data compression MNP class 5 and ITU-T V.42bis User’s Manual...
  • Page 184 Display Modes Appendix B Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. If you are running some applications (for example a 3D application or video playback and so on), you may see some disturbance, flickering or frame dropping on your screen.

  • Page 185: Displaying Movies On A Tv Or Crt

    Display Modes Some of display mode might not be supported depending on the external monitor which you use. Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer's LCD and on an external TV or CRT monitor.
  • Page 186 Display Modes 4. Click the Start the NVIDIA Control Panel button. 5. In the NVIDIA Control Panel dialogue box, click Display and then click Change display configuration of Multiple Displays to set up your television and notebook displays. User’s Manual...
  • Page 187 Display Modes User’s Manual...
  • Page 188 Display Modes Displaying movies on a HDMI Monitor This section describes how to set up your system to display movies a HDMI monitor. To connect a HDMI monitor, follow the steps below. 1. Click Start. 2. Click Control Panel. 3. Click System and Maintenance. (If your control panel is classic view, please double click "NVIDIA Control Panel"...

  • Page 189: Certification Agencies

    AC Power Cord and Connectors Appendix C AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters...
  • Page 190 AC Power Cord and Connectors For the United States and Canada, two pin plug configuration must be a 2-15P (250 V) or 1-15P (125 V) and three pin plug coniguration must be 6-15P (250 V) or 5-15P (125 V) as designated in the U. S. National Electrical code handbook and the Canadian Electrical Code Part II.
  • Page 191 What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.

  • Page 192: Toshiba Theft Registration

    TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Country stolen: Machine type: (e.g. X200 Series) Model number: (e.g. PSA50 YXT) Serial number: (e.g. 12345678G) Date stolen: Year Month Owner’s details...
  • Page 193 Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: complementary metal-oxide semiconductor CPU: central processing unit CRT: cathode ray tube...
  • Page 194 Glossary SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA+: wide extended graphics array adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
  • Page 195 Glossary cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory, it stores a copy of this data in cache memory. The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory, which saves time.
  • Page 196 Glossary CPU: Central Processing Unit. The portion of the computer that interprets and executes instructions. CRT: Cathode Ray Tube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinking rectangle or line that indicates the current position on the display screen.
  • Page 197 Glossary floppy disk: A removable disk that stores magnetically encoded data. floppy disk drive (FDD): An electromechanical device that reads and writes to floppy disks. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 198 Glossary jumper: A small clip or wire that allows you to change the hardware characteristics by electrically connecting two points of a circuit. K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte.
  • Page 199 Glossary numeric pad: A feature that allows you to perform numeric entry, or to control cursor and page movement. operating system: A group of programs that controls the basic operation of a computer. Operating system functions include interpreting programs, creating data files, and controlling the transmission and receipt (input/output) of data to and from memory and peripheral devices.
  • Page 200 (TFT) to drive each cell. TouchPad/Dual Mode Pad: A pointing device integrated into the TOSHIBA computer palm rest. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.
  • Page 201 Glossary warm start: Restarting or resetting a computer without turning it off. write protection: A method for protecting a floppy disk from accidental erasure. User’s Manual Glossary-9...

Table of Contents