Samsung AQV09NSD Service Manual page 21

Disassembly and Reassembly
No Parts
4 Heat Exchanger
5 Fan Motor
&
Cross Fan
4-4
141 Kinderkamack Rd, Park Ridge, NJ 07656 Tel: 201-782-1782 Fax: 201-782-1783 Web: www.amgair.com Email: info@amgair.com
Procedure
1) Loosen 2 fixing earth screws(CCW) of right
side. (Use +Screw Driver.)
2) Detach the Connection Pipe.
3) Detach the Holder Pipe at the rear side.
4) Loosen the 4 fixing screws(CCW) of right and
left side. (Use +Screw Driver.)
5) Lifting the Heat Exchanger up a little to push
the up side for separation from the indoor
unit.
First, check Comp. Down and then disconnect
the connection pipes before you disassemble
the Evaporator from indoor unit.
1) Loosen the fixing screw(CCW).
(Use +Screw Driver.)
2) Detach the Fan Motor from the Fan.
3) Detach the Fan From the left Holder Bearing.
Air Marketing Group LLC
Remark
Samsung Electronics