Package contents /
scope of delivery
Safety and
installation
information
Attaching
the Terminal
Installation
Package unit:
TC35 Terminal
and user guide
TC35 Terminal
User guide
The Terminal should be installed and set
up only by qualified personnel.
Connect a fast 1.25 A fuse to the incoming
line for the positive supply voltage to
protect the Terminal.
If a power supply unit is used to supply the
TC35 Terminal, it must meet the demands
placed on SELV circuits in accordance with
EN60950. When using batteries and
accumulators, adhere to the relevant
regulations.
The maximum permissible connection
length between the TC35 Terminal and
the supply source is 3 m.
Your supplier will be pleased to provide
you with a detailed technical description
and technical support for the SIEMENS
TC35 Terminal.
The TC35 Terminal can be attached with two
screws. Use screws approx. 50 mm long
and Ø 3 mm. The TC35 Terminal can be
attached to a top-hat rail using an additional
fixture (see the following page).
L36880-N8600-A100
S30880-S8600-A10
A31008-H8600-A1-*-7619
9