Cleaning The Door Seal And Window; Cleaning The Drain Filter - Panasonic NA-128VG5 Operating Instructions & Installation Instructions

Maintenance
Cleaning the door seal and
window
After using the appliance every time,
perform the following operations:
- Remove any objects from the door seal.
- Wipe the window glass and door seal to
remove lint and stains.
- Open the door timely for ventilation and
drying.

Cleaning the drain filter

We recommend cleaning the drain filter
once a month. The filter will have lint build
up, which can reduce drainage water flow.
1. Switch off and unplug the appliance.
2. Open the front drain filter cover, and
place a container to receive the drain
water.
Pump hose Drain filter
3. Pull out the pump hose, and remove
the hose stopper so that the water
flows out.
32 - Maintenance
NA-128VG5_New Zealand.indb 32
Hose stopper
4. After the water is drained completely,
turn the drain filter anticlockwise to
unscrew it. And then, pull it out.
(Be careful to unscrew the drain filter.
There may be more water drained. This
is normal.)
5. Remove any lint and debris.
6. Replace the drain filter.
7. Reinsert the hose stopper into the
hose, replace the hose, and close the
front drain filter cover.
CAUTION
Be careful when draining hot water.
Be sure to turn the drain filter clockwise
until it is in place.
Otherwise, water leak may occur, and
the front drain filter cover may not be
closed normally.
2015-2-6 20:30:49