Toshiba W-422 Service Manual page 37

1-2-23 Slider S, T Ass'y Removal
1) Move the Slider S, T Ass'y Œ, ´ to slot, and then
lift it to remove. (Refer to arrow)
ΠSLIDER S ASS`Y
Fig. 4-33 Slider S, T Ass'y Removal
Toshiba
´ SLIDER T ASS`Y
1-2-24 Plate Ground Deck, Cylinder Ass'y Removal
1) Remove the 3 Screws Œ.
2) Lift the Plate Ground Deck ´.
3) Lift the Cylinder Ass'y ˇ.
Assembly :
1) Match the 3 holes in the bottom of Cylinder ass'y
ˇ to the 3 holes of Main Base as attending not to
drop or knock the Cylinder ass'y ˇ.
2) Tighten the 1 Screw Œ.
3) Match the Plate Ground Deck ´ to the Hole of
Base Main.
4) Tighten the other 2 Screws Œ.
Note :
1) Take care not to touch the Cylinder Ass'y ˇ and
the tape guide post at reinstalling.
2) When reinstalling, Don't push down too much on
Screw Driver.
Fig. 4-34 Plate Ground Deck, Cylinder Ass'y Removal
Disassembly and Reassembly
Π3 SCREWS
´ PLATE GROUND DECK
ˇ CYLINDER ASS'Y
4-17