Tape Deck Cd-R/Md Operation; To Play Back From A Tape; To Record To A Tape; Using The Rec Selector - Marantz PM7000 User Manual

TAPE DECK CD-R/MD OPERATION

C A
INTEGRATED AMPLIFIER PM7000
INPUT SELECTOR
TAPE PHONO
TAPE
REC SELECTOR
OFF
POWER ON/OFF PHONES STANDBY 1 SPEAKERS 2
SOURCE TAPE CD-R
CD-R TAPE
COPY
ON OFF
E
PERFORM THE APPLICABLE OPERATION ON THE
CONNECTED TAPE DECK.

TO PLAY BACK FROM A TAPE

1. Press TAPE A to the indicator above the switch is lit.
2. Play a tape on the tape deck.
3. Use VOLUME B to adjust volume.
4. Use BASS and TREBLE D to adjust the tone.
NOTE:
You can play back from a tape regardless of the INPUT
SELECTOR C setting.

TO RECORD TO A TAPE

1. Set INPUT SELECTOR C to PHONO, CD, TUNER, AUX
1, or AUX 2 to select the source you want to record from.
2. Use the REC SELECTOR E (see below) to specify the
type of recording you want to perform.
3. Start play on the selected source.
4. Perform the applicable operation on the connected tape
deck to record the output from the selected source.
B
VOLUME
CD TUNER AUX1 AUX2 CD-R/MD
MUTE CD-R/MD
MIN MAX
BASS TREBLE BALANCE
SOURCE DIRECT
- + - +
ON OFF L R
D

USING THE REC SELECTOR

Use the REC SELECTOR E to specify the type of recording
you want to perform.
1. The OFF setting cuts off all signal output from the REC
OUT jacks. Note that REC SELECTOR E should normally
be in the OFF setting except when you are recording to
tape. The OFF setting shortens the signal path within the
amplifier, which minimizes crosstalk and other factors that
can cause deterioration of the sound.
2. SOURCE sets up for recording the signal from the source
selected by INPUT SELECTOR C.
3. COPY sets up for recording from TAPE to CD-R, or from
CD-R to TAPE. You can listen to the output from another
source while recording in the COPY position by selecting
the source you want with INPUT SELECTOR C.
NOTE:
The SOURCE DIRECT switch must be turned off (raised)
in order to record to a tape deck. Recording will not possible
when SOURCE DIRECT is turned on (depressed).
9