Time Menu - TrekStor Talon S2 Manual

•

time menu

standby
Here you can choose at what time the SatReceiver shall switch off itself/shall be set
into the standby mode without pressing any button. The legislator prescribes, that a
SatReceiver has to be preset in a way that it switches automatically into the standby
mode after three hours, if there is no use of it. You can switch off this function by selecting
"oFF".
• Option menu
Digital sound output
In the submenu "o
(via the HDMI respective the S/PDIF output). When using the setting "rAw" the sound
output must be made via a TV or a surround receiver, which is able to decode a digital,
multi-channel sound. In case your TV is not supporting that function, please choose the
option "Pcm".
• system menu
set a password
For some functions (e. g. the editing of the channel list or the viewing of a locked
channel) it is necessary to set a password. The default password of the SatReceiver is
000000. With this menu item you will be able to change the password. In case you have
already assigned an own password and would like to change it, then enter it into the field
"e o P
Nter LD ASSworD
enter the new password. Please write down your password somewhere and keep it in a
save place!
return to default settings
When choosing this menu item, the settings of the SatReceiver will be reset to the default
settings and the menu for the first start up will appear.
Polling list
This menu item affects the behavior of the j button of the remote control. When
you choose the setting "oN", a channel list with the last used channels is displayed after
pressing the j button. Here you can choose a channel out of the list. When you
choose the setting "oFF", the SatReceiver switches directly to the last used channel after
pressing the j button. Now you can easily switch between two channels.
• UsB
Multimedia
This function allows you to playback video, audio or picture files, which are stored on a
hard disk or an USB-stick , on your TV. Just connect the volume via the USB port on the
front side of your SatReceiver and choose under "m
would like to playback.
" you will be able to adjust the format for the digital sound output
PtioN
". Under "e N P
Nter ew ASSworD
" and "c P
oNFirm ASSworD
", "P " or "v
uSic hoto
" you will have to
", which files you
iDeo
25 EN