Sequence Setting
Preset
This function enables the memorization of a selected location and
activates the Pan, Tilt, and Zoom functions at that location. Saved
locations can be recalled using the Preset Execute command.
Setting Up Preset Numbers :
Selecting the Preset Setting menu brings up a screen as shown
below. Move the joystick in all four directions to select the
desired number.
PTZF Setting
Preset = 001
Saving Preset Locations :
Selecting a preset number and pressing the Enter key redirects
the menu to the screen shown below.
Using the joystick, adjust the location of the Pan and Tilt
functions and then set the Zoom and Focus command.
In Preset Settings, the Zoom and Focus command is
controllable only by the Zoom command.
PTZF Setting
P 000
T 000
Z 001X
F 1107
MODE:ENT/ESC,FUNC.:W/T KEY
EXIT PTZ
(1~255)
PTF SAVE
Main Menu
Camera Setting
▶
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
Sequence Setting
▶
Preset
Swing SEQ
Group SEQ
PTZ Trace
Auto Run
Power On Resume
MD Dwell Time
OFF
Preset
▶
PTZF Setting
Edit
001
Home Position OFF
Execute
Clear
Status
English - 37
ON