Eptz Setting - Vivotek IP8336W User Manual

VIVOTEK

7.32 ePTZ setting

Group: eptz_c<0~(n-1)> for n channel product. (capability.eptz > 0)
PARAMETER
osdzoom
smooth
tiltspeed
panspeed
zoomspeed
autospeed
Group: eptz_c<0~(n-1)>_s<0~(m-1)> for n channel product and m is the number of streams which
support ePTZ. (capability.eptz > 0)
PARAMETER
patrolseq
patroldwelling
preset_i<0~19>_name
preset_i<0~19>_pos
168 - User's Manual
VALUE Default
<boolean> 1
<boolean> 1
-5 ~ 5 0
-5 ~ 5 0
-5 ~ 5 0
1 ~ 5 1
VALUE Default
string[120] <blank>
string[160] <blank>
string[40] <blank>
<coordinate> <blank>
SECURITY DESCRIPTION
(get/set)
1/4 Indicates multiple of zoom in is
"on-screen display" or not
1/4 Enable the ePTZ "move smoothly"
feature
1/7 Tilt speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
1/7 Pan speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
1/7 Zoom speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
1/7 Auto pan/patrol speed
(It should be set by eCamCtrl.cgi
rather than by setparam.cgi.)
SECURITY DESCRIPTION
(get/set)
1/4 The patrol sequence of ePTZ. All the
patrol position indexes will be
separated by ","
1/4 The dwelling time (unit: second) of
each patrol point, separated by ",".
1/7 Name of ePTZ preset.
(It should be set by ePreset.cgi rather
than by setparam.cgi.)
1/7 Left-top corner coordinate of the
preset.
(It should be set by ePreset.cgi rather
than by setparam.cgi.)