Stove Dimensions And Specifications - Vermont Castings Challenger VSW20 Homeowner's Manual

Hide thumbs Also See for Challenger VSW20:
Table of Contents

Advertisement

VSW20 Wood Stove
STOVE dIMENSIONS
25" (635 mm)
21 " (546 mm)
Figure 1 -
Challenger Dimensions
EPA emissions rating (g/h, non-catalytic)
1. Maximum burn times and heat outputs are based on laboratory testing using full loads of seasoned hardwoods,
and may vary in individual use depending on how the stove is operated, type and moisture content of fuel, and
other factors. Maximum burn times are achieved under different operating conditions than are maximum heat
outputs.
2. These values are based on operation in building code-conforming homes under typical winter climate conditions
in the U.S. If your home is of nonstandard construction (e.g. unusually well-insulated, not insulated, built
underground, or if you live in a more severe and more temperate climate), these figures may not apply. Since
so many variables affect performance, consult your Vermont Castings Authorized Dealer to determine realistic
expectations for your home.
3. Under specific conditions used during EPA emissions testing.
6
30 "
(781 mm)
28 "
(730 mm)
634001  
SSW20 dims Log Length
Maximum burn time
Average area heated (sq.ft)
Range of heat output
Maximum heat output
Weight
Loading
Air Control
19" (483 mm)
24 " (622 mm)
" (457 mm)
18
2
8 hours
2
1,000 sq. ft.
3
11,000-45,000
1
46,000
3.7 gph
400 lbs
Front
Manual
SpECIFICATIONS
20300059

Advertisement

Table of Contents
loading

Table of Contents