Enjoying 2 Channel Digital Stereo Sound; Connecting To Optional Audio System; Enjoying Dts Sound - Marantz VC5200 User Manual

Dvd player
Hide thumbs Also See for VC5200:
Table of Contents

Advertisement

Connecting to Optional Audio System (Cont'd)

Enjoying 2 Channel Digital Stereo Sound

2 Channel Digital Stereo
You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a
digital audio input and speaker system (right and left front speakers).
75 ohm coaxial cable or
optical cable
To DIGITAL OUT
(COAXIAL or
To S-VIDEO OUT
OPTICAL)
or VIDEO OUT

Enjoying DTS Sound

Introducing DTS Digital Surround
discrete channels of exceptionally clear, better-than-compact disc, digital audio performance. And DTS Digital Surround is the
only 5.1 surround sound format that can deliver this revolutionary 3-dimensional experience through new music recordings on
compact discs, original 5.1 soundtracks on motion picture laserdiscs, and soon, a wide variety of products on DVD.
75 ohm coaxial cable or
Optical Cable
To DIGITAL OUT
(COAXIAL or
To S-VIDEO OUT
OPTICAL)
or VIDEO OUT
"DTS" and "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
Notes
Refer to the owner's manual of your receiver as well.
Before you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listen-
ing level. Otherwise, the speakers may be damaged by a sudden high volume sound.
Turn off the receiver before you connect or disconnect the DVD player's power cord. If you leave the receiver power on, the
speakers may be damaged.
When playing DTS-encoded discs (DVD video discs and audio CDs), excessive noise may be output from the analog stereo
jacks. To avoid possible damage to the audio system, you should take proper precautions when the AUDIO OUT jacks of the
DVD video player is connected to an amplification system. To enjoy DTS Digital Surround playback, an external 5.1 channel DTS
Digital Surround decoder system must be connected to the DIGITAL OUT jack of the DVD video player.
Connection example
To digital audio input
To S-video Input
or Video Input
S-Video cable
or Video cable
Front speaker
(left)
TM
...the finest technology ever invented to transform existing "home theatre" systems into six
To digital audio input
To S-video Input
or Video Input
S-Video cable
or Video cable
Front
speaker
(left)
Rear speaker
(left surround)
CONNECTIONS
Receiver equipped with a
digital audio input
TV
Connection example
Receiver equipped
with a DTS decoder
Front speaker
(right)
Center
speaker
Rear speaker
(right surround)
PAGE 17
Front speaker
(right)
Sub woofer

Advertisement

Table of Contents
loading

Table of Contents