Integrated Peripherals - IBT Technologies IB530 User Manual

Integrated Peripherals

This section sets configurations for your hard disk and other integrated
peripherals. The first screen shows three main items for user to select.
Once an item selected, a submenu appears. Details follow.
Phoenix - AwardBIOS CMOS Setup Utility
Master Drive PIO Mode
Slave Drive PIO Mode
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE DMA transfer access
IT888 ISA Decode IO
IT888 ISA Decode Memory
IT888 DMA
IDE HDD Block Mode
Onboard LAN Boot ROM
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
Onboard Parallel Port
Parallel Port Mode
EPP Mode Select
ECP Mode Use DMA
nd
**** 2 SuperIO Device ****
Onboard Serial Port 3
Serial Port Ise IRQ
Onboard Serial Port 4
Serial Port Ise IRQ
IDE Primary/Secondary Master/Slave PIO
These fields allow your system hard disk controller to work faster.
Rather than have the BIOS issue a series of commands that transfer to or
from the disk drive, PIO (Programmed Input/Output) allows the BIOS to
communicate with the controller and CPU directly.
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select
the best available mode.
IDE Primary/Secondary Master/Slave UDMA
These fields allow your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are Auto and
Disabled.
IDE HDD Block Mode
This field allows your hard disk controller to use the fast block mode to
transfer data to and from your hard disk drive.
IB530 User's Manual
Integrated Peripherals
ITEM HELP
Auto Menu Level >
Auto
Disabled
Disabled
Enabled
[Press Enter]
[Press Enter]
[Press Enter]
Enabled
Disabled
Disabled
3F8/IRQ4
2F8/IRQ3
Normal
387/IRQ7
SPP
EPP1.7
3
3E8h
IRQ11
Disabled
IRQ10
BIOS SETUP
29