Rear Panel Dct6416 Et Dct3416 - Motorola DCT6200 User Manual

Section 1 -
Rear panel (DCT6416/3416)
7. IR
RF Out
Cable IN
1. Cable IN 16. RF Out
1. CABLE IN
Connects to the signal from the service provider.
2. ETHERNET
Not yet operational.
3. AUDIO IN
Not yet operational.
4. S/PDIF
S/PDIF orange connector is a digital output connector transmitting Dolby Digital 5.1 or audio PCM sound. It is used to connect
the DCT6200/6412/6416 to a stereo tuner or an A/V receiver to get theater-quality surround sound.
5. VIDEO OUT
This connector is used to carry the image from the digital terminal to the VIDEO IN connector of the television set. Use a RCA
(red, white, yellow) wire.
6. OUTLET
This alternating current outlet may be used as an additional outlet to plug in a television set to the DCT6200/6412. It is not
recommended to plug in several devices on this outlet or powerful equipment such as a home theater.
7. IR
To plug in an infrared sensor when terminal is located in enclosed furniture.
8. USB
Not yet operational.
6
Your new terminal
4. S/PDIF 12. S-Video
S-Video
S/PDIF
IR
! !
13. Optical
10. Audio OUT R et L
S/PDIF
5. Video OUT 11. Y, Pb, Pr
Y
Video OUT
PB
L
AUDIO OUT PR
Ethernet
HDMI
R
Optical
S/PDIF
17. HDMI
2. Ethernet 15. Power connector
USB
IEEE
8. USB 14. IEEE
axion.ca
6. OUTLET
DCT user guide