Table of Contents
Advertisement
∫ Attaching the front microphone
≥ The microphone holder is set up so that a 21 mm (0.83 q) external microphone (AG-MC200G:
optional) can be attached. Check in advance whether the microphone you wish to use can be
attached.
1
Attach the microphone holder to the microphone holder attachment part.
≥ Attach by using a commercially available screw driver.
≥ When attaching the microphone holder, be sure to tighten the screws firmly even though you
might hear a squeaking sound.
2
Attach an external microphone
(optional) to the microphone
holder, and tighten the
microphone holder screw.
3
Connect the external
microphone to the AUDIO
INPUT1 terminal (XLR 3 pin).
≥ When wiring the microphone cable, use
the cable clamper of this unit.
≥ Keep the microphone holder screw,
zoom ring pin and INPUT terminal cap
out of reach of children to prevent
swallowing.
∫ Attaching the INPUT terminal
cap
Attach the INPUT terminal cap while the AUDIO
INPUT1, 2 terminals (XLR 3 pin) are not used.
A INPUT terminal cap
18
SQT1040
A Microphone holder attachment part
B Microphone holder
C Microphone holder mounting screws
D AUDIO INPUT1 terminal (XLR 3 pin)
E Microphone cable clamper
F Microphone holder screw
G External microphone (optional)
∫ Attaching the tripod
≥ There are tripod mounting holes that are
compatible with 1/4-20UNC and 3/8-16UNC
screws. Use the size that matches the
diameter of the tripod's fixing screw.
≥ Attaching a tripod with a screw length of
5.5 mm (0.22 q) or more may damage the unit.
A Tripod receptacle
Advertisement
Table of Contents
