Kenwood TK-630 series Instruction Manual page 8

0
FULL FEATURED FRONT PANEL
KCH-4
I 1 I I I
I
I I
I d
&
Microphone input
receptacle
0
POWER switch
0
GRP (GROUP) UP switch
Press to turn the power ON and OFF.
GROUP UP switch for group selection. Holding the switch causes the
function to repeat.
Group down switch for group selection. Holding the switch causes the
function to repeat.
If the MON switch is pressed once while the radio is waiting for reception, the
coded squelch is canceled. If the switch is pressed for two seconds, the
noise squelch is disabled and speaker audio unmutes.
Pressing this switch toggles the system scan function.
Can be programmed for and operate any of the following: PA (public
address), HA (horn alert), TA (talk around), IC (intercom), AN (alphanumeric),
SP (external speaker), D/A (delete/add), OPT (option) or AUX (auxiliary)
function (programmed by the FPU (KPG-7D)).
Rotary control knob for channel selection.
Audio level control knob: for receive, PA, IC volume.
Indicates when the transmitter is keyed.
Lights when the MON switch is pressed and the coded squelch is disabled.
Indicates when scan mode is enabled.
,
@
GRP (GROUP) DOWN switch
@
MON (MONITOR) switch
0
SCN (SCAN) switch
@
KEY 1-4 switches
0
CH (CHANNEL) selector
@
VOL (VOLUME) control
@
TX indicator
@
MON (MONITOR) indicator
@ SCAN indicator
9