@I
-
(CHANNEL ADD) indicator
8
SCN (SCAN) indicator
@
0
(DOT) indicator
8
PI (PRIORITY 1) indicator
@
P2 (PRIORITY 2) indicator
8
TA (TALK AROUND) indicator
@
SP (EXTERNAL SPEAKER) indicator
@
OPT (OPTION) indicator
@
MON (MONITOR) indicator
@ CALL indicator (An optional SIGNALING unit is required: 2-tone or DTMF
If the selected channel is in the scan list, the indicator lights at that channel.
Indicates when scan mode is enabled.
Lights when the programmed AUX switch is pressed.
Lights when a PRIORITY
1
channel is shown on the display.
Lights when a PRIORITY 2 channel is shown on the display.
Lights when the transceiver is in talk around mode (TA switch).
Lights when the received signal is output to the PA speaker.
Lights when the programmed OPT switch is pressed.
Lights when the MON switch is pressed and the coded squelch is disabled.
d ec od e r
)
Lights when called individually.
Indicates when channel is in use.
Indicates when the transmitter is keyed.
@ BUSY indicator
@ TX indicator
8