19
3.11 VENT HEAT SHIELD INSTALLATION
For shipping purposes, the heat shield has been attached on top of the appliance.
If venting with a 90 degree elbow directly off of the top of the appliance, the elbow heat shield must be
repositioned and secured with the two screws (supplied) as illustrated.
The heat shield can be adjusted up to a maximum of 18". Remove the two screws as illustrated to adjust the
shield. If the elbow height exceeds this height, the use of the shield is no longer required.
18"
REMOVE SCREWS
MAX
TO ADJUST
HEIGHT
W415-0834 / D / 09.07.12
www.NorthlineExpress.com
NorthlineExpress.com
Toll-Free 1-866-667-8454