1. Manuals
  2. Brands
  3. Contec Manuals
  4. Grinder
  5. Alpha
  6. Instruction manual

Contec Alpha Instruction Manual

Floor grinder
Hide thumbs Also See for Alpha:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
®
ALPHA
Floor Grinder
Instruction manual
(USA)

Advertisement

Table of Contents
loading

Related Manuals for Contec Alpha

Summary of Contents for Contec Alpha

  • Page 1 ® ALPHA Floor Grinder Instruction manual (USA)

  • Page 2: Table Of Contents

    ® Instruction manual ALPHA - 2 - Index 1. EU-Declaration of Conformity ...3 2. Machine applications ...4 3. Technical data ...4 4. Application of tools ...4 5. Safety rules for the operation of the floor grinder ...5 6. Operation ...6 7.

  • Page 3: Eu-Declaration Of Conformity

    ® Instruction manual ALPHA - 3 - Declaration of Conformity according to EN ISO/IEC 17050-1 EC-Declaration of Conformity Month.Year: For the machine described below Product denomination: Floor Grinder ® Model: Alpha Serial number: Herewith we declare, that the machine is complying with all the essential requirements of the Machine Directive 2006/42/EC of the EUROPEAN PARLIAMENT of the 17th of Mai 2006 The person authorized to compile the relevant technical documentation (According to Appendix II Nr.

  • Page 4: Machine Applications

    - 4 - Machine applications Grinding of horizontal, dry floors such as concrete and steel surfaces with or without a ® coating and asphalt using CONTEC grinding tools. The use of the machine outside is only possible in dry weather. Technical data...

  • Page 5: Safety Rules For The Operation Of The Floor Grinder

    ® Instruction manual ALPHA - 5 - Application of diamond discs Grinding of: Description: Colour: Hard floors CS16 / PCD grit silver Normal concrete CS40 / VS2 Blue / red Aggressive concrete CA1 / CA2 Brown / green Terrazzo MBC line...
  • Page 6 ® Instruction manual ALPHA - 6 - 10. In the event of a large amount of dust during operation, connect a dust collector to the grinder. 11. Depending on the floor (floor coating) grinding can produce gases. The operator must be held responsible if these generated gases are dangerous and if protection is necessary.

  • Page 7: Changing Of Tools

    Tilt the machine onto the back wheels and rest it on the handlebar. ® All tools discs are fixed with three Allen screws to the tool bracket. Appendix „Alpha tools“ No. 10. Remove the screws with an 8mm Allen key.
  • Page 10 Motor 1,5 KVA, 110 Volt, 50 HZ Omega 15,00 04-10-02-01 Bottom Handle Alpha 0,75 04-10-03-00 Top Handle Alpha 2,10 04-10-03-00-US Top Handle Alpha GB and US Version 2,10 60-30-10-30 Handle screw M10-25 Alpha 0,05 50-20-203-742 Switch for Alpha 0,85 70-21-120-90...

  • Page 11: Bracket For Coupling Alpha 7

    Switch Box For Motor Protective Alpha 110 Volt England 0,00 51-20-30-05 Undervoltage Switch 110 V 50 HZ Alpha England 0,00 543-204 Cable Ring 6 mm Alpha 0,00 55-03-11-11-US Motor 1,1 KVA, 115 Volt, 60 HZ ALPHA US 15,00 Seite 2 von 2...

Table of Contents