Initial Setup For Basic Connections (Ready To Play) - Panasonic PV-D4733S-K Operating Instructions Manual

Initial Setup for Basic Connections (Ready to Play)

Before doing Initial Setup
1
Turn TV on.
2
a
See connections
<RF Coaxial Cable Connection>
Set TV to channel 3.
<AV Cable Connection>
Set TV to VIDEO.
3
[DECK ➛ ➛ ➛ ➛ ➛ TV]
• Go to "Initial Setup (Ready to Play)." (See below.)
[Cable Box ➛ ➛ ➛ ➛ ➛ DECK ➛ ➛ ➛ ➛ ➛ TV], [DSS ➛ ➛ ➛ ➛ ➛ DECK ➛ ➛ ➛ ➛ ➛ TV]
• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel
in your time zone.
• If you use a DSS Receiver, it must be turned off.
Initial Setup (Ready to Play)
1
Press VCR on remote for VCR mode.
2
Plug DECK Power Cord into AC wall outlet. DECKcomes on and SELECT
LANGUAGE screen appears. When one of "1", "2", "3" keys is pressed, auto
channel and clock set starts.
• If screen below does not appear, check DECK - TV connection and, if TV is tuned to
channel 3, try switching it to channel 4.
• To change VCR's output channel, please refer to "VCR's Output Channel" on page 19.
• If wrong language is set, do "Reset All Memory Functions" (p. 9).
Plugging the AC Power Plug into an AC outlet
SELECT LANGUAGE
ENGL I SH
FRANÇA I S
ESPAÑOL
CH AUTO SET PROCEEDING
CANCEL : STOP
AUTO CLOCK SET
PROCEEDING
CANCEL : STOP
16
PV-D4733S-K(E) P1-25 (030314).p65
RF Coaxial Cable Connection and
Select language
Press 1 : English
:PRESS 1
Press 2 : French
:APPUYER 2
:OPR I M I R 3 Press 3 : Spanish
Notes
• Function buttons are inoperative during Initial Setup.
• To remove a cassette during Auto Set, press EJECT on
the remote or STOP/EJECT twice on the DECK.
In this case, settings must be made manually. (See p. 18.)
• Depending on conditions, Auto Clock Set may take longer
than 30 minutes. If so, press STOP to stop setup and
perform settings manually. (See p. 18.)
16
b AV Cable Connection on page 12.
Continued on next page...
2003/04/09, 13:52