Chine - Zanussi ZTE 273 User Manual

Alarme (Buzzer)
When the drying cycle has finished, an intermittent audi-
ble signal will sound. By depressing button ALARM the
acoustic signal is switched off in the following cases:
• when selecting the programme
• when depressing the buttons
• when the programme selector dial is turned to another
position during the programme or when you depress
an option button during the cycle
• at the end of the programme.
The corresponding light comes on.
Départ différé (Delay Start)
With the Départ différé (Delay Start) button, you can
delay the start of a programme by 3, 6 or 9 hours.
1. Select the programme and additional functions.
2. Press the Départ différé (Delay Start) button as many
times as necessary (the lights show which delay time
have been chosen).
3. To activate the delay timer, press button Marche/Arrêt
(Start/Pause) . The lights 9h 6h 3h change on every
three hours until the time is getting on for start cycle.
Starting the programme
Press Marche/Arrêt (Start/Pause) button to start the dryer
after having selected the programme and the options. The
relevant light will stop flashing. If the programme selector
dial is turned to another position, when the machine is
running, the buzzer will sound and the programme phase
indicator lights will flash. The drum turns alternately in
both directions during drying.
All drying programmes end with a 10 minute cooling
phase. You may remove the laundry after this phase.
If the door of the appliance or the small door at the bottom
is opened while the programme is running, this button
must be pressed again after closing the door in order to
restart the programme from the point at which it was in-
terrupted. This button must be depressed also after a
power failure and after having reinserted the water reser-
voir, if it has been emptied in the middle of a programme
after lighting up of light Bac plein (Water Reservoir) .
In both cases the light of the Marche/Arrêt (Start/Pause)
button flashes to remind you that the start button needs
to be pressed again.
Indicator lights
These lights indicate the following functions:
• Séchage (Drying) light: This light indicates that the
appliance is in the drying phase.
• Anti-Froissage/Fin (Anticrease/End) light: This light
is on at the end of the cooling phase, during the anti-
creasing phase and at the end of the programme.
• Bac plein (Water Reservoir) light: This light indicates
that the appliance is in the drying phase. This light
comes on at the end of the programme to remind you
that the water reservoir must be emptied out. If this
light illuminates during a programme this means that
the water reservoir is full. The buzzer sounds, the pro-
gramme stops, the light of the Start/Pause button
flashes. This light comes on also when the water res-
ervoir is not inserted correctly.
• Filtres (Filter) light: This light illuminates at the end of
the programme to remind you that the filters must be
cleaned.
• Condenseur (Condenser) light: It comes on every 80
cycles to remind you that the condenser must be
cleaned.
Changing programme
To change a programme which has been selected by mis-
take once the programme has started, first turn the pro-
gramme selector to " O" (OFF) position. The programme
is cancelled.
The programme can no longer be changed directly
once the programme has started. If nevertheless
there is an attempt to change the programme on the pro-
gramme knob or if an function button (excluding the
Alarme (Buzzer) button) is pressed, led above Marche/
Arrêt (Start/Pause) button starts flashing temporarily in
yellow. The drying programme is not however affected by
this (laundry protection).
At the end of the programme
If the laundry is not removed at the end of the cycle, the
dryer performs an anticreasing phase (duration: 30 mi-
nutes maximum).
If you do not remove the laundry, the dryer will stop au-
tomatically at the end of the anticreasing phase. Lights
Anti-Froissage/Fin (Anticrease/End) , and Bac plein (Wa-
ter Reservoir) remain lit and the buzzer sounds for 2 mi-
nutes.
Turn the programme selector dial to " O " to switch the
machine off. Remove the laundry from the drum and care-
fully check that the drum is empty.
9