Fisher-Price BLT72 User Manual page 3

Adult assembly required. Choking hazard to
children under the age of 3 years – contains
small parts prior to assembly.
1
• Slide a hubcap (peg side up) onto the straight axle.
• Slide a rear wheel (indented side down) onto the
straight axle.
Hole
Straight Axle
2
• Turn the frame upside down.
• Insert the straight axle through the holes in the rear of
the frame.
WARNING
Rear Wheel
(Indented Side Down)
Hubcap
(Peg Side Up)
Straight Axle
Frame
Bottom View
Assembly
Rear Wheel
(Indented Side Up)
Straight Axle
Frame
Assembled
Rear Wheel
Scrap Block
3
of Wood
• Turn the frame on its side with the exposed end of the straight
axle up.
• Place the cap nut assembly tool under the assembled rear wheel
and onto the cap nut.
• Slide a rear wheel (indented side up) onto the end of the
straight axle.
• Slide a hubcap (peg side down) onto the straight axle.
• Place a cap nut on the end of the straight axle. Tap the
cap nut with a hammer. Gently pull the rear wheel up
to be sure the cap nut is securely attached to the straight axle.
• Insert one of the tabs on a cover into a slot in the hubcap. Push
to snap the cover into place. Repeat this procedure to attach the
other cover to the other hubcap.
Pedal Hub
Pedal Axle
Hole
Slot
4
• Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit
into the slot in each pedal hub.
3
Cap Nut
(Peg Side Down)
Tabs
Pedal Hub
Hubcap
Cover
Hubcap
Cap Nut
Assembly Tool