Installing The 2D Barcode Scanner Module - Partner OT-110 User Manual

Installing the 2D Barcode Scanner module

Refer to the following to install the Barcode Scanner module.
1. Turn off the device.
2. Remove the two screws on the
top cover.
3. Remove the top cover.
4. Connect the Barcode Scanner
module to slot B of the device
as shown.
5. Fix the Barcode Scanner
module with two screws as
shown.
80 C H A P T E R 4 I N S T A L L I N G T H E O P T I O N A L M O D U L E S
Slot B