Note; Caution; Fn + F5; Windows 95 - Panasonic CF-27 Series Toughbook Reference Manual

Key Combinations

CAUTION

Do not press the following key combinations repeatedly in (quick) succession.
Do not press the following key combinations while using the touch pad (touchscreen or mouse) or other keys.
Key
Functions
LCD brightness con-
Fn + F2
trol
Display change
Fn + F3
Speakers on/off switch
Fn + F4
Volume control

Fn + F5

( down)
Volume control ( up)
Fn + F6
Holding down on the keys
changes the sound level.
*2
Power off using the
Fn + F7
suspend function
Power management
Fn + F8
enable/disable switch
Remaining capacity of
Fn + F9
the battery pack
*2
ECO mode for con-
Fn + F10
serving power
1
*
The optional port replicator or external display port adapter is required for use with an external display.
2
*
When [Disable] is set for [Fn+F7/Fn+F10 key] with the Setup Utility, these key combinations become inoperable.
* 3
This "mouse" indicates the touch pad, the touchscreen and an external mouse.
Hold down the Fn key and press F2 to change the
brightness.
By pressing this key combination, you can select ei-
ther an external display *1
Rebooting the computer, or powering off then on,
restores the display setting of the Setup Utility.
Pressing this key combination turns on/off audio from
the internal speakers and headphone jack. Rebooting
the computer, or powering off then on, restores the
speaker setting of the Setup Utility.
CAUTION
Disabling the speakers will also disable the warn-
ing beep.
Pressing this key combination adjusts the volume of
the internal speakers and headphone jack.

NOTE

This key combination cannot be used to ad-
just the volume of the warning beep.
A dull elongated sound may be heard while
adjusting the volume.
Pressing this key combination causes the current
screen on the display to be saved to memory, and
powers off the computer. When the computer is pow-
ered on, by sliding the power switch, the saved
screen will be displayed. (The computer must be
plugged into the AC adapter or have a battery pack
with sufficient remaining power installed.)
Pressing this key combination temporarily disables
the power management feature of the Setup Utility.
Rebooting the computer, or powering off then on,
restores the power management setting of the Setup
Utility. page 22
Pressing this key combination displays the remain-
ing battery capacity on the screen.
Pressing this key combination turns off the LCD and
hard disk drive until operation is resumed by press-
*3
ing any key or mouse (
keyboard and mouse connected to the USB port).
, LCD or simultaneous.
page 24

Windows 95

except the
(
2
Popup Window
Is displayed when
the brightness is
at its maximum
value.
OFF
ON
Down
Up
Enable
(Standard)
Disable (OFF)
Remaining
capacity (%)
display
Battery pack is
not installed.
page 35, page 37)