Installing adapters
This section provides information and instructions for installing and removing
adapters. Your computer has three expansion slots for PCI adapters. One slot, used
for an AGP adapter, is available. You can install an adapter up to 228 mm (9
inches) long in the AGP slot, PCI slot 2, or PCI slot 3. You can install an adapter
up to 200 mm (7.9 inches) long in PCI slot 1.
To install an adapter:
1. Remove the cover. See "Removing the cover" on page 10.
2. Remove the adapter slot cover for the appropriate expansion slot.
3. Remove the adapter from its static-protective package.
4. Install the adapter into the appropriate slot on the system board.
15
Chapter 1. Installing options