Reconnect Devices; Disconnect Devices; Rename The Phone; Rename A Paired Device - Motorola Moto G User Manual

Note: This feature requires an optional accessory.
Standard Method
To connect with a new device, you need to pair with it. You only need to do this once for each
device. To connect again, just turn on the device.
1. Make sure the device you are pairing with is in discoverable mode.
Note: Refer to the guide that came with the device for details.
2. From home, tap Apps
3. Tap ON to turn on and scan. If Bluetooth power is already on, tap SEARCH FOR DEVICES.
4. Tap a device to connect.
5. If necessary, tap OK or Pair, or enter the device passkey (like 0000) to connect to the device.
When the device is connected, the Bluetooth indicator appears in the status bar.
Note: Using a mobile device or accessory while driving may cause distraction and may be illegal.
Always obey the laws and drive safely.

Reconnect Devices

Once you have paired a Bluetooth device with your phone reconnecting it is simple.
To automatically reconnect your phone with a paired device, simply turn on the device.
n
To manually reconnect your phone with a paired device, tap the device name in the Bluetooth
n
devices list.

Disconnect Devices

When you are not using a Bluetooth device, you can disconnect it from your phone.
To automatically disconnect your phone from a paired device, simply turn off the device.
n
To manually disconnect your phone from a paired device, tap the device name in the devices list,
n
and then tap OK.

Rename the Phone

You can change the device name for your phone.
1. From home, tap Apps
2. Edit the existing name, or enter a new name and then tap Rename.

Rename a Paired Device

You can change the name of a device paired to your phone.
Connectivity
> Settings > Bluetooth.
> Settings > Bluetooth > > Rename this device.
98