Table of Contents
Advertisement
Viewing the Calendar and Almanacs
You can view device activity, such as when a waypoint was
saved, and almanac information for the sun and moon, and
hunting and fishing.
1
Select
.
2
Select an option:
• To view device activity for specific days, select Calendar.
• To view the sunrise, sunset, moonrise, and moonset
times, select Sun and Moon.
• To view the predicted best times for hunting and fishing,
select Hunt and Fish.
3
If necessary, select
or
Setting an Alarm
1
Select
> Alarm Clock.
2
Select
and
to set the time.
3
Select Turn Alarm On.
4
Select an option.
The alarm sounds at the selected time. If the device is off at the
alarm time, the device turns on and sounds the alarm.
Opening the Stopwatch
Select
> Stopwatch.
Satellite Page
The satellite page shows your current location, GPS accuracy,
satellite locations, and signal strength.
Changing the Satellite View
By default, the satellite view is with North at the top. You can
change the view of the satellites to be oriented with your current
track toward the top of the screen.
1
Select
> Satellite >
2
Select Track Up.
Turning Off GPS
Select
> Satellite >
Simulating a Location
1
Select
> Satellite >
2
Select
> Set Location On Map.
3
Select a location.
4
Select Use.
VIRB
Remote
®
The VIRB remote function allows you to control your VIRB
action camera using your device. Go to
to purchase a VIRB action camera.
Controlling a VIRB Action Camera with Your
Handheld Device
Before you can use the VIRB remote function on your handheld
device, you must enable the remote setting on your VIRB
camera. See the owner's manual for your VIRB camera for more
information.
1
Turn on your VIRB camera.
2
From your handheld device, select
3
Wait while the handheld device connects to your VIRB
camera.
4
Select an option:
• To start and stop recording video, select REC.
• To take a photo, select
Customizing Your Device
to view a different day.
.
> Use With GPS Off.
> Use With GPS Off.
www.garmin.com/VIRB
> VIRB Remote.
.
Controlling a VIRB Action Camera with Your Dog
Collar Device
Before you can use the VIRB remote function on your handheld
device, you must enable the remote setting on your VIRB
camera. See the owner's manual for your VIRB camera for more
information.
1
Turn on your VIRB camera.
2
On the handheld device, select Dog List.
3
Select the dog wearing the VIRB camera.
4
Select Show Info.
5
Select Virb Control.
The dog collar device connects to the VIRB and the VIRB
control page opens.
6
Select an option:
• Select Start to start recording.
• Select Stop to stop recording.
• Select Photo to stop recording.
Customizing Your Device
Customizing the Main Menu
You can move, add, and delete items in the main menu.
1
From the main menu, select Setup > Main Menu.
2
Select a menu item.
3
Select an option:
• Select Move Up or Move Down to change the location of
the item in the list.
• Select Remove to delete an item from the list.
• Select Add Page to place an item on the list after you
have removed it.
• Select
> Restore Defaults to reset the order of all
items in the menu.
Customizing the Data Fields
Before you can customize the data fields on the map, you must
enable the data fields
(Enabling the Map Data Fields,
page
11).
You can customize the data fields and dashboards of the map,
compass, elevation plot, and trip computer.
1
Open the page for which you will change the data fields.
2
Select a data field to customize.
3
Select the new data field.
For data field descriptions, see
page
18.
Enabling the Map Data Fields
Select
>
> Setup Map > Dashboard > Small Data
Fields.
System Settings
Select Setup > System.
GPS: Sets the GPS to Normal, WAAS/EGNOS (Wide Area
Augmentation System/European Geostationary Navigation
Overlay Service), or Demo Mode (GPS off). For more
information about WAAS, go to
/aboutGPS/waas.html.
BaseCamp BaseStation: Sets how the device connects to
BaseCamp when the device is connected to the computer.
Dog Settings
Select Setup > Dogs.
Data Field Options,
http://www.garmin.com
11
Advertisement
Table of Contents
