Table of Contents
Advertisement
00571A-SCC-C6403P-ENG
8/17/06 1:53 PM
Select ON and press [Enter ] to display an additional menu window of
"MOTION DET ".
You can select one from the sub items of TOP..., BOTTOM..., LEFT...,
RIGHT..., CENTER... or USER... as AREA where the Motion Detection
function is applied.Select one from TOP..., BOTTOM..., LEFT..., RIGHT...,
CENTER... or USER... and press [Enter ]. You 'll see the factory defaults of
that item and Motion Detection will be applied to the area you selected.
If you set the AREA menu to USER and press [ENTER], you may vary the size
and position of the area where you want to apply the MOTION detection
function by yourself. Press Left, Right, Up, or Down to select an area AREA.
Press ENTER and then Left, Right, Up, or Down to select a LOCATION. Press
ENTER again to move back to the upper menu.
Use [ENTER] and Left, Right, Up, or Down to move and scale the MOTION
detection area.
Press [ENTER] again and you will escape the AREA setup menu.
Use SENSITIVITY to set up the sensitivity of MOTION detection strength.
The higher, the more sensitive.
AREA
[Left, Right, Up, Down]
LOCATION
After PAN/TILT/ZOOM/FOCUS/IRIS movement finishes, MOTION DET function
will not work for about 5 seconds to stablize the chage of the screen.
MOTION detection function operates based on the brightness change within the
setup region. Therefore, erroneous operation may occur depending on the
brightness difference between the background and the object that is being
taken, or the status of the area setup, etc.
ZOOM SPEED
In the ZOOM SPEED menu you can select the speed of the ZOOM Key
(Tele/Wide).
Use the [Left] or [Right] keys in the ZOOM SPEED menu to select
the speed.
1 : Slowest speed
2 : Low speed
3 : High speed
4 : Fastest speed
3-8
Page 3-8
AREA
Use the
Keys
LOCATION
DIGITAL ZOOM
You may set up the digital zoom magnification ratio in the DIGITAL ZOOM
menu. The magnification ratio ranges from OFF to 10. If you set Digital
Zoom of SCC-C6403P to max. 10 times, the mode will become the 32 time
optical zoom and you will be able to enlarge a subject by max. 320 times.
Use Left or Right to select a magnification ratio in the DIGITAL ZOOM menu.
(CAMERA SET)
CAMERA ID
OFF
V-SYNC
INT
COLOR/BW
BW...
MOTION DET
OFF
Use the
ZOOM SPEED
3
DIGITAL ZOOM
OFF
[Left, Right]
DISPLAY ZOOM
OFF
Keys
DISPLAY P/T
OFF
EXIT
QUIT
DISPLAY ZOOM
In DISPLAY ZOOM, you can display the ZOOM scale on the screen.
(CAMERA SET)
CAMERA ID
OFF
V-SYNC
INT
COLOR/BW
COLOR...
MOTION DET
OFF
ZOOM SPEED
4
DIGITAL ZOOM
OFF
DISPLAY ZOOM
ON
DISPLAY P/T
OFF
EXIT
SAVE
If no change on the ZOOM scale is made for 3 seconds, the information window will
disappear.
DISPLAY P/T
In DISPLAY P/T, you can display the position of Pan/Tilt on the screen.
(CAMERA SET)
CAMERA ID
OFF
V-SYNC
INT
COLOR/BW
COLOR...
MOTION DET
OFF
ZOOM SPEED
4
DIGITAL ZOOM
OFF
DISPLAY ZOOM
OFF
DISPLAY P/T
ON
EXIT
SAVE
If no change on the Pan/Tilt position is made for 3 seconds, the information window
will disappear.
It allows an error range of ±2°.
(CAMERA SET)
CAMERA ID
OFF
V-SYNC
INT
E
COLOR/BW
BW...
MOTION DET
OFF
ZOOM SPEED
3
DIGITAL ZOOM
X10
DISPLAY ZOOM
OFF
DISPLAY P/T
OFF
EXIT
QUIT
X020
347/060
3-9
Advertisement
Table of Contents
