Buttons On The Touchscreen; Customer Programmable Features - Uconnect® 8.4 Settings - Chrysler 300 2015 Operating Information Manual

Buttons On The Touchscreen

Buttons on the touchscreen are accessible on
the Uconnect® Touchscreen.
CAUTION!
Do not attach any object to touchscreen,
doing so can result in damage to the touch-
screen.
Customer Programmable Features
— Uconnect® 8.4 Settings
Press the "Settings" button on the touchscreen
to display the menu setting screen. In this mode
the Uconnect® system allows you to access
programmable features that may be equipped
such as Display, Units, Voice, Clock, Safety &
Driving Assistance, Lights, Doors & Locks,
Auto-On Comfort, Engine Off Options, Audio,
Phone/Bluetooth®, Restore Settings, Clear
Personal Data and System Information.
NOTE:
• Only one touchscreen area may be se-
lected at a time.
158
• Depending on the vehicles options, fea-
ture settings may vary.
When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting until a check-mark appears
next to the setting, showing that setting has
been selected. Once the setting is complete,
either press the Back Arrow button on the
touchscreen to return to the previous menu, or
press the "X" button on the touchscreen to close
out of the settings screen. Pressing the Up or
Down Arrow button on the right side of the
screen will allow you to toggle up or down
through the available settings.
Display
After pressing the "Display" button on the touch-
screen the following settings will be available:
• Display Mode
When in this display you may select one of the
auto display settings. To change Mode status,
press and release the "Manual" or "Auto" button
on the touchscreen. Then press the back arrow
button on the touchscreen.
NOTE:
When Day or Night is selected for the Dis-
play Mode, the usage of the Parade Mode
feature will cause the radio to activate the
Display Brightness Day control even though
the headlights are on.
• Display Brightness With Headlights ON
When in this display, you may select the bright-
ness with the headlights on. Adjust the bright-
ness with the "+" and "–" setting buttons on the
touchscreen or by selecting any point on the
scale between the "+" and "–" buttons on the
touchscreen. Then press the back arrow button
on the touchscreen.
NOTE:
To make changes to the Display Brightness
with Headlights ON setting, the headlights
must be on and the interior dimmer switch
must not be in the party or parade posi-
tions.
• Display Brightness With Headlights OFF
When in this display, you may select the bright-
ness with the headlights off. Adjust the bright-