Default Function Permission - Oce VarioLink 6022 User Manual

Utility mode
11.9.2

Default Function Permission

If external server authentication was selected, limitations can be placed on the machine functions that can
be used by an authorized user. (The default setting is "Allow".)
The following operations can be limited.
- Copy operations
- Scan operations
- Fax operations
- Printing from a printer
- Saving documents on the hard disk
- Printing the transmitted document
- Saving the document to the external memory
Note
To limit machine use by registered users, specify settings in the User Registration screen.
With "Print Scan/Fax TX", printing can be prevented when scanning or faxing a document saved in a
box.
1
Display the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
Settings screen" on page
2
Touch [4 User Authentication/Account Track].
The User Authentication/Account Track screen appears.
3
Touch [2 User Authentication Settings].
The User Authentication Setting screen appears.
Why is [2 User Authentication Settings] not available?
?
% [2 User Authentication Settings] is not available if "User Authentication" on the General Settings
screen is set to "OFF".
4
Touch [1 Administrative Settings].
5
Touch [Default Function Permission].
The Function Permission screen appears.
6
Touch the button for the desired settings.
7
Touch [OK].
The default function permissions are set.
VarioLink 6022/7522
11-36.
"Displaying the Administrator
11
11-65