5.4.7 Changing the default settings
The default settings offer the most common scan settings. Please try using
these settings prior to adjustment.
These settings effect only the SB mode.
The default of scanner settings
Item
Document type
Resolution
Contrast
Auto reset time
q Scan parameters
Set the default setting for document type, resolution, contrast and scan size.
1
Press <Menu>, <2>, <4>, <1>, then <Enter>. The machine prompts you
to select the default document type setting.
Doc. T�pe:Photo&Text
2
Use <q> or <p> to select the setting.
3
Press <Enter>. The machine prompts you to select the default resolution
setting.
Resolution
4
Use <q> or <p> to select the setting.
5
Press <Enter>. The machine prompts you to select a default contrast
setting.
Contrast
6
Use < q > or <p> to select the setting.
7
Press <Enter> to save the settings.
To return to the standby mode, press <Reset>.
5-14
Available setting
Photo&Text, Photo, Text
200, 300, 600 dpi
Normal, Dark, Darkest, Lightest,
Light
Auto reset timer: 1 to 10 minutes
Reset after scan: On, Off
/
/Enter
:200dpi
/
/Enter
:Normal
/
/Enter
Default setting
Photo&Text
200 dpi
Normal
3 minutes
Off