Flash-To-Pass; Understanding The Features Of Your Vehicle; High/Low Beam Switch; Windshield Wipers And Washers - Dodge Durango 2013 Owner's Manual

Hide thumbs Also See for Durango 2013:

Table of Contents

Flash-To-Pass

You can signal another vehicle with your headlights by

partially pulling the multifunction lever toward the steer-

ing wheel. This will cause the high beam headlights to

turn on until the lever is released.

Push the multifunction lever toward the instrument

panel to switch the headlights to high beam. Pulling the

multifunction back toward the steering wheel will turn

the low beams back on, or shut the high beams off.

The windshield wiper/washer controls are located on the

multifunction lever on the left side of the steering col-

umn. The front wipers are operated by rotating a switch,

located on the end of the lever. For information on the

rear wiper/washer, refer to "Rear Window Features" in

"Understanding The Features Of Your Vehicle".

Multifunction Lever

Rotate the end of the lever to one of the first four detent

positions for intermittent settings, the fifth detent for low

wiper operation and the sixth detent for high wiper

Table of Contents