Pfaff 8301 Instruction Manual page 31

600
603 Switch outputs
This function allows the switching of the digital
outputs. "OUT" denotes the selected output
(1 - 16). The selected output (S) is set under
"VAL" via the +/- key (+), and also reset (R) via
the +/- key (-). Locks are checked. Unassigned
outputs are not switched.
OUT VAL
1 S/R
2 S/R
3 S/R
4 S/R
5 S/R
6 S/R
7 S/R
8 S/R
9 S/R
10 S/R
11 S/R
12 S/R
13 S/R
14 S/R
15 S/R
16 S/R
604 Move step motors
The step motors SM1 (X-axis) and SM2 (Y-axis)
are moved individually via their respective +/-
keys. Locks are not checked.
605 Cold start (RESET)
The controls carry out a cold start (RESET) via
this function; data is re-initialised. Once this
function is selected, the machine must be
switched OFF and ON again.
X13 D-SUB Pin 5) roller up/down
X13 D-SUB Pin 8) blower ON
X13 D-SUB Pin 9) sonotrode fan
Input
31