Handle Latch; Bench Mounting Miter Saw; Removing Or Installing Saw Blade - Makita LS1020 Instruction Manual

Handle latch
This tool i s equipped with a handle latch
which is used to lock the handle in the
lowered .position. To release from the
lowered position, lower the handle slightly
and turn the handle latch to the released
position. To lock the handle in the lowered
position, lower the handle fully and turn
the handle latch to the locked position.
When carrying the tool, lock the handle in
the lowered position and secure the turn
base by means of the grip.
Bench mounting miter saw
This tool should be bolted with two bolts
to a level and stable surface using the bolt
holes provided in the tool's base.
Removing
or
installing saw blade
CAUTION :
Always be sure that the tool i s switched off and unplugged before removing or installing
the blade.
To remove the blade, use the socket wrench
to loosen the hex bolt holding the center
cover by turning it more than three turns
counterclockwise. Raise the safety cover
and center cover.
5