Table of Contents
Advertisement
DIR-320NRU Multifunction Wireless Router Supporting
WiMAX, 3G GSM/CDMA with Built-in Switch
User Manual
WiMAX
This menu is designed to operate WiMAX USB modems.
Information
On the WiMAX / Information page, you can connect to the network of your WiMAX ISP to
establish a high-speed wireless connection to the Internet.
The following fields and controls are available on the page:
Parameter
SSID
Diode on modem
Link status
MAC address
RSSI
CINR
Base station ID
Transmit power
Frequency
Figure 115. The WiMAX / Information page.
An identifier for the WiMAX network. Specify the parameter if
your WiMAX ISP requires this.
Select the checkbox to enable the modem's LED indicator.
The state of connection to the WiMAX network.
Red light: The connection is not established.
Yellow light: The USB modem is connecting to the network.
Green light: The connection is established.
The MAC address of the WiMAX USB modem.
The signal level at the input of the modem's receiver.
The relation of the signal level to the noise level. This parameter is
used to measure the quality of the signal.
The identifier of the base station.
The signal level at the output of the modem's receiver.
The frequency of the signal transmitted by the modem's receiver.
Page 140 of 156
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
