Alcatel-Lucent 7210 SAS M OS Configuration Manual page 131

src-ip
Syntax src-ip {ip-address[/mask]} [netmask]
no src-ip
Context config>filter>ip-filter>entry>match
Description
This command configures a source IP address range to be used as an IP filter match criterion.
To match on the source IP address, specify the address and its associated mask, e.g. 10.1.0.0/16. The
conventional notation of 10.1.0.0 255.255.0.0 may also be used.
The no form of the command removes the source IP address match criterion.
Default
no src-ip
Parameters
ip-address — The IP prefix for the IP match criterion in dotted decimal notation.
mask — The subnet mask length expressed as a decimal integer.
netmask — Any mask epressed in dotted quad notation.
src-port
Syntax src-port { eq} src-port-number
no src-port
Context config>filter>ip-filter>entry>match
Description This command configures a source TCP or UDP port number for an IP filter match criterion.
The no form of the command removes the source port match criterion.
Default no src-port
Parameters
eq — Specifies the operator to use relative to src-port-number for specifying the port number match
src-port-number — The source port number to be used as a match criteria expressed as a decimal
7210 SAS M Router Configuration Guide
Values
0.0.0.0 — 255.255.255.255
Values
0 — 32
Values
0.0.0.0 — 255.255.255.255
criteria. The eq keyword specifies that src-port-number must be an exact match.
integer.
Values
1 — 65535
Filter Policies
Page 131